EKF SCX-PCIE Mezzanine Side Card for CPU Boards Secondary Compact PCI Serial Backplane System Slot Controller

GeneralMixed function mezzanine side card for EKF CompactPCI® Serial CPU boardsForm factor single size Eurocard (board dimensions 100x160mm2)PICMG® CompactPCI® Serial (CPCI-S.0) system slot cardBased on new mezzanine connectors HSE1/HSE2 (8 x PCIe® Gen3)Suitable e.g. for use with CPU cards SC4-CONCERTO, SC5-FESTIVAL8HP assembly together with CPU card24-lanes PCI® Express Gen3 switchSupports secondary CompactPCI® Serial backplaneProvides Gigabit Ethernet front panel I/O (3 x RJ45)Provides USB 3.0 front panel I/O (3 x Type A)Provides mass storage capability (1 x M.2 NVMe/SATA, 1 x mSATA)  Backplane ConnectorsCompactPCI® Serial backplane connectors P1, P2, P4, P5, system board pin assignmentPCI® Express support for all eight peripheral slots of a secondary CompactPCI® Serial backplaneFour links Gen3 x4 (available on peripheral slots 1, 2, 3, 5)Four links Gen2 x1 (available on peripheral slots 4, 6, 7, 8)Can be used with any standard CompactPCI® Serial backplane (system slot left aligned)  PCI Express® Switching24-lane 6-port PCI Express® Gen3 packet switch PEX 8724Upstream 1 x4 link wired to the HSE1 mezzanine connector (CPU card PCH)Downstream 4 x4 links to the CompactPCI® Serial backplaneDownstream 1 x4 link to the NVMe SSD M.2 socket6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PRUpstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)Downstream 4 x1 links to the CompactPCI® Serial backplane6-lane 6-port PCI Express® Gen2 packet switch PI7C9X2G606PRUpstream 1 x1 link wired to the HSE2 mezzanine connector (CPU card PCH)Downstream 3 x1 links to the I210 Gigabit Ethernet NICsDownstream 1 x1 link to the TUSB7320 USB controller  Front Panel I/O3 x RJ45 Gigabit Ethernet jacks, three individual on-board I210-IT controllers1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate3 x USB 3.0 (3.1 Gen1) Type A receptaclesTwo USB ports via on-Board USB controller, one USB port derived from HSE1 mezzanine connector  NetworkingThree individual networking interface controllers (NIC), based on PCI Express®1000BASE-T, 100BASE-TX, 10BASE-T connectionsIntel® I210-IT -40°C to +85°C operating temperature GbE controllers w. integrated PHYIPv4/IPv6 checksum offload, 9.5KB Jumbo Frame support, EEE Energy Efficient EthernetIEEE 802.1Qav Audio-Video-Bridging (AVB) enhancements for time-sensitive streams (TSN)IEEE 1588 and 802.1AS packets time stamping for high-precision time synchronizationAll GbE ports wired via RJ45 front panel connectors  USBUpper front panel receptacle wired to HSE1 mezzanine connector (CPU carrier card PCH)Middle and lower connectors wired to PCI Express® dual port USB 3.0 controller TUSB7320USB 3.1 Gen1 (formerly USB 3.0) xHCI (eXtensible host controller interface) SuperSpeed supportedUSB 2.0 high-speed, full-speed, low-speed supported3 x front panel Type-A USB 3.0 host connectorsVBUS (+5V) 1.5A high current power switches assigned to front panel connectors  Mass Storage SolutionsM.2 (formerly known as NGFF) socket for an NVMe type SSD module up to 2280 sizePCI Express® Gen3 x4 interface (M-key socket)Socket height 4.2H (double sided module allowed)Capacity up to 2TB as of currentSuitable for operating system installation (boot device)Alternate usage with an SATA type SSD B-M keyAutosensing analog switch for selection between PCIe® and SATA operationOn-Board 6G SATA controller 88SE9170PCI Express® Mini Card socket, full-size or half-size modulesPCI Express® Mini Cards of all styles supported: USB 2.0 and PCIe® based, and mSATAAutosensing analog switch for selection between PCIe® and SATA operationOn-Board 6G SATA controller 88SE9170Suitable for wireless applications e.g. WLAN, Bluetooth or 2G/3G/LTE modem cardMicro SIM card holder associated (15mm x 12mm ETSI TS 102 221 V9.0.0, Mini-UICC)Suitable for fieldbus modules e.g. CAN-FD, and industrial Ethernet modules (real time networking)Custom specific F/P design for additional pigtail SMB antenna connectors (12HP front or wider)Custom specific F/P design for non-radio applications e.g. CAN-FD (12HP or wider)  ApplicationsLocal expansion (side card) for EKF CPU boardsSystem expansion with a secondary CompactPCI® Serial backplaneSupports PCI Express® on up to eight peripheral slots (4x4 Gen3, 4x1 Gen2)Multi GPU card systemsAutonomous driving test equipmentRugged environments  Regulation & EnvironmentalDesigned & manufactured in GermanyISO 9001 certified quality managementCustom specific development on requestLong term availabilityCoating, sealing, underfilling on requestRoHS compliant 2002/95/ECOperating temperature -40°C to +85°C (industrial temperature range)Storage temperature: -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzEC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)MTBF 23.7 years