EKF SL2-BRASS CompactPCI Serial • 9-Port Gigabit Ethernet Switch

General PICMG® CompactPCI® Serial standard (CPCI-S.0) peripheral slot card or system slot cardSingle Size Eurocard 3U 4HP 100x160mm2CompactPCI® Serial backplane connectors P1, P6Suitable for PCIe® x 1 capable standard peripheral slots (for option on-board NIC)Suitable for CompactPCI® Serial backplane with star archtitecture Ethernet (P6)Front Panel I/O 4 x M12 X-coded front panel GbE receptacles, rail approved, Cat6A, IEC 61076-2-1091000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate front portsFuture proof investment into cabling infrastructure - up to 10Gbps with M12 Cat6AM12 X-coded to RJ45 connector Cat6A cable assemblies available from several suppliersBackplane I/O (Option) CompactPCI® Serial backplane connector P1 used for PCI Express® x 1 lane to optional Intel® I210-IS Gigabit Ethernet ControllerOption GbE backplane communication - CompactPCI® Serial backplane connector P6 used for 4 x GbE over backplaneCompactPCI® Serial star type Ethernet architecture backplane suitable for control via system slot CPU card, up to eight SL2-BRASS individually connected to system slot CPU P6 Ethernet ports, for a total of up to 32 x M12 linked front panel switch ports (link type depends on CPU card P6 solution either switch or NIC)CompactPCI® Serial star type Ethernet architecture backplane suitable for cascading of up to five SL2-BRASS w/o CPU card, one SL2-BRASS master (system slot) is wired via P6 to a maximum of four SL2-BRASS slave boards (peripheral slots), for a total of up to 20 x M12 directly interconnected front panel switch portsCompactPCI® Serial backplane w/o P6, suitable for CPU control over up to eight SL2-BRASS by means of the optional on-board NIC, for a total of up to 32 x M12 front panel switch ports, for highest application flexibility (routers, LAN segmentation e.g.)Gigabit Ethernet Switch Marvell® 88E6390 based Gigabit Ethernet switch (in use 8 x GbE MAC/PHY 1000BASE-T, 1 x GbE MAC/SerDes)High performance, non-blocking, Gigabit EthernetSupport for up to 16K MAC addresses, 10KByte Jumbo FramesSupports 802.1 Audio Video Bridging (AVB) Gen 2Time Sensitive Networking (TSN) Standards, IEEE 1588v2 one-step PTPSynchronous EthernetQuality of Service (QoS) support with 8 traffic classesSupports 4096 802.1Q VLANs, three levels of 802.1Q securityUnmanaged or managed solutionIntegrated microprocessor (IMP) enables enhanced managed switch designs (customer programming)IMP GUI debugger w. ANSI C compiler & assembler available on request from Marvell®Remote (in-band) management available on request via Marvell® SOHO Switch GUI SoftwareConfigurable in-band management through SerDes/SGMII switch port (connected to the optional on-board NIC), or GbE PHY switch port via P6 backplane Ethernet (1_ETH)Gigabit Ethernet Controller (Option) Intel® I210-IS Gigabit Ethernet controller internally wired to GbE switch via SerDes9.5KB Jumbo Frame supportHardware-based time stamping (IEEE 1588) and support for 802.1ASOption IEEE 802.1Qav compliant Audio-Video Bridging (AVB)IPv4, IPv6, TCP/UDP checksum offloadsBased on PCI Expess® x 1 from CompactPCI® Serial backplane connector P1Driver support for all major operating systemsApplications Scalable (modular) GbE switching based on 19-inch rack mountingLight in-band managementRailway usage via front panel M12 cablingIndustrial IoT networking - TSNEnvironmental, Regulatory Designed & manufactured in GermanyCertified quality management according to ISO 9001Long term availabilityRugged solutionCcoating, sealing, underfilling available on requestRoHS compliantOperating temperature 0°C to +70°C (commercial temperature range) availableOperating temperature -40°C to +85°C (industrial temperature range) availableStorage temperature -40°C to +85°C, max. gradient 5°C/minHumidity 5% ... 95% RH non condensingAltitude -300m ... +3000mShock 15g 0.33ms, 6g 6msVibration 1g 5-2000HzMTBF 54.5 yearsEC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)Power consumption 12V/0.4A max.