Enerpac 11100 Pump

P, 11-Series, Ultra-High Pressure Hand Pumps ▼ Shown from left to right: 11-100, P2282
Ultra-High Pressure up to 40,000 psi 2-Way Shut-Off Valve Model Number 72-750
For 40,000 psi applications requiring a shut-off valve or gauge snubber. Made of 318 Stainless
Steel and utilizing .38 inch cone fittings, it is the perfect selection for use with your ultra-high
pressure hand pump.
Test System Gauges Ideal for monitoring pressure in your hydraulic circuit. Test System
Gauges, such as the T6010L, are available with cone threads or
NPTF threads and a variety of pressure ranges.
• Two-speed operation on the P2282 allows for faster fill operation, reducing cycle times for many testing applications
• 303 Stainless steel construction on the 11-100 and 11-400 models enable use with many different fluids, such as distilled water,
diesters, silicones, soluble oils and petroleum
• Large release knob for improved control of pressure release
• Outlet ports are ¾"-16 UNF cone for 40,000 psi rating
• Ultra-high pressure fittings feature all stainless steel construction except adaptor 41-366 which features nickel plated carbon steel
construction.
148
Page:
To system
▲ Typical Test System T6010L 83-011
Cone Seal Stainless Steel High Pressure fittings seal on a ‘cone’ surface and do
not require pipe sealer.
The Gland Nut holds the sleeve and tubing tight against the cone surface to provide a
40,000 psi seal.
43-001 43-701
Stainless Steel Tubing Sleeve
43-300 45-116
72-750
43-701
P2282
To system
▲ Test System with Gauge and Snubber
Body Pump Type
Usable Oil Capacity
Model Number
(in3)
Two-Speed
Bleed Hole Gland Nut
Single-Speed
60 45 45
P2282 11-100 11-400
Pressure Rating * (psi) 2nd 1st stage stage
200 -
40,000 10,000 40,000
Oil Displacement per Stroke (in3) 1st 2nd stage stage
0.99 -
Max.
Handle Effort
0.037 0.152 0.038
* Contact Enerpac for applications where operating pressure is less than 10% of operating pressure.
86
(lbs)
106 120 120