Ace Ma600Eum Shock Absorber

11
Miniature Shock Absorbers MA30 to MA900, and FA1008VD-B (adjustable) Manual
Warranty
Service life
Fundamentally, all modifications to the product by third parties lead to exclusion from the warranty.
Obvious defects must be reported to the vendor in writing immediately after delivery, no later than one week, but in any case before
processing or installation, otherwise the assertion of a warranty claim is excluded. A timely dispatch is sufficient to keep the term.
The vendor is to be given an opportunity to check on site. If the complaint is justified the vendor offers warranty by repair or replacement at its own discretion. If the rectification fails, the buyer
may choose to demand reduction of payment or cancellation of the contract. If there is only a minor lack of conformity, particularly
with only minor defects, the buyer nevertheless has a right of withdrawal.
If, after failed rectification, the buyer chooses to cancel the contract due to a defect of title or material defect, they are not
entitled to additionally claim for damages.
If, after failed fulfilment, the buyer chooses compensation, the goods remain with the buyer, if this is reasonable. The compensation is limited to the difference between the purchase price and
the value of the defective item. This does not apply if the vendor maliciously causes the breach of contract.
The quality of the goods is only considered as agreed upon with the product description of the vendor. Public statements, claims
or advertising of the manufacturer do not represent an additional contractual specification of quality of the goods.
If the buyer receives defective mounting instructions, the buyer is only obligated to deliver defect-free mounting instructions and
only if the defect to the mounting instructions prevents proper mounting.
The warranty period is two years and begins upon completion.
Exchange and return of custom products are fundamentally excluded. The factory conditions of the manufacturing factory
apply to parts not manufactured and processed by the vendor, which can be viewed by the orderer at the vendor at any time.
Construction and installation parts are delivered according to the present standard of engineering.
In general industrial shock absorbers are machine elements that are subject to wear. Wear parts such as seals, pressure chambers
and pistons are excluded from the general warranty. The wear of seals is largely dependent upon the operating conditions and the
respective application and its operating parameters.
In general with this model of industrial shock absorber with grooved ring wiper seal system an average service life of three to
five million load changes can be expected. Adverse environmental and operating conditions can significantly reduce the expected
service life.
Stand 03.2021 21_22_0019 Issue 05.2022
Performance data Max. Energy Capacity
TYPES MA30EUM MA50EUM-B MA35EUM MA150EUM MA225EUM MA600EUM MA900EUM FA1008VD-B
1
W3 Nm/cycle 3.5 5.5 4.0 22.0 25.0 68.0 100.0 1.8
W4 Nm/h 5,650 13,550 6,000 35,000 45,000 68,000 90,000 3,600
Effective Weight me min.
kg 0.23 4.50 6.00 1.00 2.30 9.00 14.00 0.20
me max.
kg 15 20 57 109 226 1,360 2,040 10
Return Force min.
N 1.7 3.0 5.0 3.0 5.0 10.0 10.0 3.0
Return Force max.
N 5.3 6.0 11.0 5.0 10.0 30.0 35.0 6.0
Side Load Angle max.
° 2.0 2.0 2.0 2.0 2.0 2.0 1.0 2.5
1
Return Time s 0.3 0.3 0.2 0.4 0.1 0.2 0.4 0.3
Weight kg 0.011 0.025 0.045 0.061 0.173 0.352 0.414 0.026
If side load angle is higher contact ACE.
Technical data Energy capacity: 1.8 Nm/cycle to 100 Nm/cycle Impact velocity range: 0.15 m/s to 4.5 m/s. Other speeds on request.
Operating temperature range: 0 °C to 66 °C Mounting: in any position Positive stop: integrated
Adjustment: Hard impact at the start of stroke, adjust the ring towards 9 or PLUS. Hard impact at the end of stroke, adjust the ring
towards 0 or MINUS.
Material: Outer body, Accessories: steel corrosion-resistant coating Piston rod:
hardened stainless steel Permissible torque of locknut:
MA30: 4.0 Nm to 4.3 Nm MA35: 5.0 Nm to 5.4 Nm MA50: 4.0 Nm to 4.3 Nm MA150: 12.9 Nm to 14.1 Nm
MA225: 27.0 Nm to 29.8 Nm MA600: 60 Nm to 66 Nm MA900: 60 Nm to 66 Nm FA1008VD-B: 4 Nm
Damping medium: Oil, temperature stable Application field: Linear slides, Pneumatic cylinders, Swivel units, Handling modules, Machines and plants, Finishing and processing
centres, Automatic machinery, Tool machines, Locking systems Note: If precise end position datum is required consider use of the stop collar type AH. Shock absorber is preset at delivery in a neutral
position between hard and soft.
Safety instructions: External materials in the surrounding area can attack the sealing components and lead to a shorter service life.
Please contact ACE for appropriate solution suggestions. Do not paint the shock absorbers due to heat emission.
On request: Nickel-plated or other special options available for special order. Models without rod end button.
ACE Stoßdämpfer GmbH · Postfach 1510 · D-40740 Langenfeld · T +49 (0)2173 - 9226-10 (Technik -20) · F +49 (0)2173 - 9226-19
ACE Stoßdämpfer · [email protected] GmbH · www.ace-ace.com