Repuestos industriales y soluciones de ingeniería desde 2001.
Aron AM3RDP1C2004 Valve
Fichas Técnicas / Documentación del Producto
| Marca |  |
| Categoría | Válvula |
| Nombre del producto | Aron AM3RDP1C2004 Valve |
| Código de producto | AM3RDP1C2004 |
¡Ponte en contacto con nosotros! En 24 horas laborables (excepto fines de semana y festivos) confirmaremos el estado del inventario y el plazo estimado de entrega.
Descripción del producto
Los productos Aron, incluido Aron AM3RDP1C2004 Valve, se obtienen a través de canales de importación paralela y se entregan a nuestros clientes en United States con rapidez y fiabilidad. Imtek Engineering ofrece piezas originales Aron a precios competitivos. Aunque Aron AM3RDP1C2004 Valve no figure en nuestro sitio web, puede solicitar una cotización en cualquier momento y nuestro equipo le responderá en breve.
United StatesREDUCING / PRESSURE SEQUENCING VALVES CETOP 3
AM.3.RD / AM.3.SD...
SCREWS AND STUDS CH. IV PAGE 21
ORDERING CODE AM
Modular valve
3
CETOP 3/NG6
**
RD = Direct pressure reducing valve
SD = Direct pressure sequencing valve
*
Max. operating pressure: port P 350 bar Max. pressure adjustable 250 bar
Setting ranges:
spring 1 2 ÷ 30 bar spring 2 10 ÷ 120 bar spring 3 60 ÷ 250 bar Max. flow
40 l/min Internal drainage RD:
Positive overlap version 0,5 l/min Negative overlap version 2 l/min Hydraulic fluids
Mineral oils DIN 51524 Fluid viscosity 10 ÷ 500 mm2/s Fluid temperature -25°C ÷ 75°C
Ambient temperature -25°C ÷ 60°C Max. contamination level class 10 in accordance
with NAS 1638 with filter ß25≥75 Weight 1,3 Kg
PRESSURE - FLOW RATE AM3RD
Control on lines AM.3.RD version = A / P AM.3.SD version = P
PRESSURE - FLOW RATE AM3SD 3
*
1 = Positive overlap 2 = Negative overlap Omit for version AM3SD
2
Type of adjustment C = Grub screw V = Handwheel Setting ranges 1 = max. 2 ÷ 30 bar (white spring)
2 = max. 10 ÷ 120 bar (yellow spring) 3 = max. 60 ÷ 250 bar (green spring)
**
00 = No variant V1 = Viton
4
2
1
Relieving ←
*
P (bar)
3
*
Pr (bar)
4
AM3RD and AM3SD valves are direct acting spool type pressure reducing and sequencing units, respectively,
with one end pre-loaded by means of a spring an the other end exposed to
the hydraulic pressure.
The drainage is drained within the valve to port T. Pressure is adjustable
by means of a screw and locknut, or of a handwheel.Three types of springs
allow adjustment within the range 2÷250 bar. The pressure reducing valves are available in two versions:
with positive overlap (suitable with low flow rate) and with negative overlap to
obtain a greater pressure reinstatement speed.
Q (l/min)
1
Q (l/min)
The fluid used is a mineral based oil with a viscosity of 46 mm2/sec at 40 degrees C.
The tests have been carried out at with a fluid temperature of 40 degrees C.
HYDRAULIC SYMBOLS
Serial No.
AM.3.RD.A
OVERALL DIMENSIONS
AM.3.RD.P
Type of adjustment
AM.3.SD.P
V Handwheel C
Grub screw
Application example Support plane specifications
Preguntas Frecuentes
Preguntas frecuentes sobre Aron AM3RDP1C2004 Valve de Aron. Imtek Engineering está listo para ayudarle a adquirir Aron AM3RDP1C2004 Valve de Aron en United States.
Imtek Engineering obtiene productos originales de Aron a través de canales de suministro de confianza y los ofrece a clientes en United States a precios competitivos.
