Atos PFE-51110/1DV Vane Pump

Table A005-18/E
Vane pumps type PFE-31, PFE-41, PFE-51 fixed displacement - cartridge design

PFE-*1 are fixed displacement vane pumps, cartridge design with integral hydraulic balancing for high
volumetric efficency, long service life and low noise level.
IN
OUT
They are available in three different body sizes with max displacements up
to 44, 85 and 150 cm3/rev and single, multiple or with through-shaft configurations.
Mounting flange according to SAE J744 standard.
1



Pump body Rotor with vanes Balanced plates Shaft
IN port - SAE 3000 flange
OUT port - SAE 3000 flange
Inlet and outlet ports can be oriented in four different positions to match any
installation requirement.

PFE-41
Simplified maintenance as the pumping cartridge can be easily replaced.
Max displacement: up to 150 cm3/rev Max pressure: 210 bar
MODEL CODE OF SINGLE PUMPS
- 31
XA
PFE
036 /
1
T
D
*
*
/
Fixed displacement vane pump
Seals material:
- = NBR
PE = FKM
Option for pumps with through shaft, see section 3:
XA, XA7, XB, XB7, XC = for coupling with other pumps type PFE Size, see section 2:
31, 41, 51
Series number
Displacement (cm3/rev), see section 2 Drive shaft, see section 8 and 9:
cylindrical, keyed 1 = standard 2 = long version - only for PFE-41 and PFE-51
3 = for high torque applications splined:
5 = for single and multiple pumps (any position) 6 = for single and multiple pumps (only first position)
7 = for second and third position in multiple pumps
Port orientation, see section 6:
T = standard U, V, W = on request
Direction of rotation, viewed from the shaft end:
D = clockwise (supplied standard if not otherwise specified) S = counterclockwise
only for PFE-31 and PFE-41
Note: for multiple pumps factory assembled, see tech. table A190 2
HYDRAULIC CHARACTERISTICS - based on mineral oil ISO VG 46 at 50 °C
Size code
31
Displacement code Displacement Max working pressure (1)
41
51
010
016
022
028
036
044
029
037
045
056
070
085
090
(cm3/rev)
10.5
16.5
21.6
28.1
35.6
43.7
29.3
36.6
45.0
55.8
69.9
85.3
90.0 109.6 129.2 150.2
(bar)
160
Recommended pressure on inlet port
110
129
150
210
from -0,15 to 1,5 bar for speed up to 1800 rpm; from 0 to +1,5 bar for speed over 1800 rpm
Min speed
(rpm)
Max speed (2)
(rpm) 2400 2800 2800 2800 2800 2500 2500 2500 2500 2500 2500 2000 2200 2200 2200 1800
Volumetric efficiency (3) Noise level (3)
(dBA)
800
80
83
87
90
90
92
90
92
93
93
93
94
93
93
93
94
62
62
63
63
63
64
67
67
68
68
69
69
72
72
73
74
(1) Max pressure is 160 bar for HFDU, HFDR and HFC fluids (2) Max speed is 1800 rpm for /PE versions; 1500 rpm for HFDU, HFDR and HFC fluids
(3) Measuring data with: n = 1450 rpm; P = 140 bar;
A005