B&R Automation X20CP0484 Cpu Processor Module

Technical description Order number Application memory Type Data retention
Writable data amount Guaranteed Results for 5 years Guaranteed erase/write cycles
Error-correcting code (ECC) Interfaces Interface IF2 Signal Variant Line length
Transfer rate Transfer Physical layer Half-duplex Full-duplex Autonegotiation
Auto-MDI/MDIX Interface IF4 Type Variant Max. output current Interface IF5
Type Variant Max. output current Interface IF6 Fieldbus On base module
Electrical properties Electrical isolation
X20CP0410
X20cCP0410
256 MB eMMC flash memory
X20CP0411
X20CP0420
512 MB eMMC flash memory
256 MB eMMC flash memory
10 years 40 TB 21.9 GB/day 20,000 Yes
Ethernet 1x RJ45 shielded Max. 100 m between 2 stations (segment length)
10/100 Mbit/s
2x shielded RJ45 (switch)
10BASE-T/100BASE-TX Yes Yes Yes Yes
USB 1.1/2.0 Type A 0.2 A
USB 1.1/2.0 Type A 0.2 A X2X Link master X20BB52: Compact-S PLC base module with integrated RS232 interface
X20BB53: Compact-S PLC base module with integrated RS485 interface X20BB57: Compact-S PLC base module with integrated RS232 and CAN bus interface
Ethernet (IF2) isolated from other interfaces and PLC X2X (IF6) isolated from other interfaces and PLC: Yes, with X20PS9600 / No, with X20PS9602
USB (IF4, IF5) not isolated from each other and PLC
Operating conditions Mounting orientation Horizontal Yes Vertical Yes Installation elevation above sea level
0 to 2000 m No limitation >2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20 Ambient conditions Temperature Operation
Horizontal mounting orienta-25 to 60°C tion Vertical mounting orientation
-25 to 50°C Derating See section "Derating" in the X20PS960x data sheet.
Storage -40 to 85°C Transport -40 to 85°C Relative humidity Operation 5 to 95%, non-condensing Up to 100%, condensing
5 to 95%, non-condensing Storage 5 to 95%, non-condensing Transport 5 to 95%, non-condensing
Mechanical properties Note Order 1x terminal block Order 1x terminal block
Order 1x terminal block X20TB12 separately.
X20TB12 separately.
X20TB12 separately.
Order 1x power supply module Order 1x power supply Order 1x power X20PS9600 or X20PS9602 separately.
module X20PS9600 or supply module Order 1x Compact-S PLC base X20BB5x separately.
X20PS9602 separately.
X20cPS9600 separately.
Order 1x Compact-S PLC Order 1x Compact-S PLC base X20BB5x separately. base X20cBB5x separately.
Pitch 4) X20BB5x 37.5+0.2 mm
Table 2: X20(c)CP041x and X20CP0420 - Technical data 1) 2) 3) 4)
2.22
For details about storage health data, see Automation Help.
Without USB interface.
The memory size for remanent variables is configurable in Automation Studio.
The pitch is based on the width of the Compact-S PLC base.
7