Repuestos industriales y soluciones de ingeniería desde 2001.
- Productos
- B&R Automation
- Módulo
- B&R Automation X20CP1584 Module
B&R Automation X20CP1584 Module
Fichas Técnicas / Documentación del Producto
| Marca | |
| Categoría | Módulo |
| Nombre del producto | B&R Automation X20CP1584 Module |
| Código de producto | X20CP1584 |
¡Ponte en contacto con nosotros! En 24 horas laborables (excepto fines de semana y festivos) confirmaremos el estado del inventario y el plazo estimado de entrega.
Descripción del producto
Los productos B&R Automation, incluido B&R Automation X20CP1584 Module, se obtienen a través de canales de importación paralela y se entregan a nuestros clientes en United States con rapidez y fiabilidad. Imtek Engineering ofrece piezas originales B&R Automation a precios competitivos. Aunque B&R Automation X20CP1584 Module no figure en nuestro sitio web, puede solicitar una cotización en cualquier momento y nuestro equipo le responderá en breve.
United StatesHorizontal Vertical Installation elevation above sea level 0 to 2000 m >2000 m
Degree of protection per EN 60529 Ambient conditions Temperature Operation
Horizontal mounting orientation Vertical mounting orientation Derating Storage
Transport Relative humidity Operation Storage Transport Mechanical properties
Note
Dimensions Width Height Depth Weight
X20CP1583
X20CP1584
X20cCP1584
X20CP1585
X20CP1586
X20cCP1586
Yes Yes No limitation Reduction of ambient temperature by 0.5°C per 100 m
IP20
-25 to 60°C -25 to 50°C See section "Derating".
-40 to 85°C -40 to 85°C 5 to 95%, non-condensing
Up to 100%, 5 to 95%, non-condensing condensing 5 to 95%, non-condensing
5 to 95%, non-condensing
Up to 100%, condensing
Order application memory (CompactFlash) separately Backup battery included in delivery
X20 end cover plate (right) included in delivery 12-pin X20 terminal block included in delivery
Interface module slot covers included in delivery 150 mm 99 mm 85 mm 400 g
Table 2: X20CP1583, X20CP1584, X20cCP1584, X20CP1585, X20CP1586, X20cCP1586 - Technical data
1) 2) 3) 4) 5) 6) 7)
For details about storage health data, see Automation Help.
The specified values are maximum values. For examples of the exact calculation, see section "Mechanical and electrical configuration" in the X20 system
user's manual.
When operated at temperatures above 55°C, a derating of the nominal output power to 5 W for the X2X Link power supply must be taken into account.
In parallel operation, it is only permitted to expect 75% of the nominal power. It is important to make sure that all power supply units operated in parallel
are switched on and off at the same time.
The memory size for remanent variables is configurable in Automation Studio.
1 MB SRAM minus the configured remanent variables.
For additional information, see section "Communication / POWERLINK / General information / Hardware - IF/LS" in Automation Help.
Data sheet V 1.57
5
Preguntas Frecuentes
Preguntas frecuentes sobre B&R Automation X20CP1584 Module de B&R Automation. Imtek Engineering está listo para ayudarle a adquirir B&R Automation X20CP1584 Module de B&R Automation en United States.
Imtek Engineering obtiene productos originales de B&R Automation a través de canales de suministro de confianza y los ofrece a clientes en United States a precios competitivos.
