CD Automation
CD Automation REVO E 3PH Thyristor power controller
Product Code:REVO E 3PH
Description
REVO E 3PH Thyristor Power Controller is for Inductive Loads, including Resistance, Kanthal Super (MoSi2 Element) or SiC element on Secondary of Transformer, an Universal and Digital Unit based on configurable powerfull microprocessor. It is possible to configure all inputs, the firing mode and control mode for all load type.
SCR Power Controller suitable for most applications including Short Wave Infrared (SWIR) & Inductive load typesCurrent range – 35A, 45A, 75A, 100A, 125A, 150A, 225, 300A, 350A, 400A, 450A, 500AThree leg switching of 3/4 wire star or 3/6 wire delta loadsFully digital and user configurable for all inputs, firing modes, feedback modes and load typesFiring modes include zero crossing (ZC), burst firing (BF), single cycle (SC), soft start + burst firing (S+BF) and phase angle + soft start (S+PA)Microprocessor based electronic circuit fully isolated from powerUniversal input signal with automatic zero/span calibrationPower feedback or voltage compensationRS485 Comms MODBUS protocol as standardUnbalanced loadHeater break alarm to diagnose partial or total load failure and short circuitControl & monitor power, current & voltage via external keypad (CD-KP)IP20 ProtectionFrom 35 up to 500AMax. voltage 480V or 600V AC as optionDesigned to drive resistive, transformer loads and MoSi2 ElementsInputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft startN°1 Retransmission is availableTechnical Specifications
REVO E 3PH Thyristor Power Controller is for Inductive Loads, including Resistance, Kanthal Super (MoSi2 Element) or SiC element on Secondary of Transformer, an Universal and Digital Unit based on configurable powerfull microprocessor. It is possible to configure all inputs, the firing mode and control mode for all load type.
- SCR Power Controller suitable for most applications including Short Wave Infrared (SWIR) & Inductive load types
- Current range – 35A, 45A, 75A, 100A, 125A, 150A, 225, 300A, 350A, 400A, 450A, 500A
- Three leg switching of 3/4 wire star or 3/6 wire delta loads
- Fully digital and user configurable for all inputs, firing modes, feedback modes and load types
- Firing modes include zero crossing (ZC), burst firing (BF), single cycle (SC), soft start + burst firing (S+BF) and phase angle + soft start (S+PA)
- Microprocessor based electronic circuit fully isolated from power
- Universal input signal with automatic zero/span calibration
- Power feedback or voltage compensation
- RS485 Comms MODBUS protocol as standardUnbalanced loadHeater break alarm to diagnose partial or total load failure and short circuit
- Control & monitor power, current & voltage via external keypad (CD-KP)
- IP20 Protection
- From 35 up to 500A
- Max. voltage 480V or 600V AC as option
- Designed to drive resistive, transformer loads and MoSi2 Elements
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft start
- N°1 Retransmission is available