Coax MK 20 Valve

coax® data sheet - coaxial valve type MK 20
FK 20 08/2022 2/2-way valve
direct acting
pressure range
PN 0-100 bar
orifice
DN 20 mm
connection
thread/flange
function
valve normally closed symbol NC
B a
A B
valve normally open symbol NO
Above stated body materials refer to the valve port connections that get in
contact with the media only!
details needed ■ orifice ■ port ■ function NC/NO ■ operating pressure ■ flow rate
■ media ■ media temperature ■ ambient temperature ■ nominal voltage
a
A
pressure balanced, with spring return
body material
① brass ③ brass, nickel plated ④ steel, nickel plated ⓪ aluminium
valve seat
synthetic materials on metal
seal materials
NBR general specifications
options
ports
MK FK
special threads special flanges NO > 100 bar upon request
② steel galvanized ⑤ without non-ferr. Metals ⑥ stainless steel
PTFE, FPM, CR, EPDM
threads G 3/4 - G 1 1/4 flanges PN 16 / 40 / 100 NC 0-16 / 0-40 / 0-63 / 0-100
bar
Kv value vacuum pressure-vacuum back pressure media
m³/h leak rate P1 P2 P2 > P1
8.4 < 10-6 mbar•l•s-1 upon request available (max. 16 bar) gaseous - liquid - highly viscous gelatinous - contaminated
abrasive media damping
upon request
flow direction switching cycles switching time
opening closing AB 1/min ms
media temperature
°C
ambient temperature
°C
limit switches manual override approvals mounting weight additional equipment
available bi-directional (max. 16 bar)
as marked 150 opening 110 closing 110
DC: -20 to +100
AC: -20 to +100
DC: -20 to +80
AC: -20 to +80
-40 to +160 -40 to +160
inductive / mechanical available LR/DNV/WAZ mounting brackets kg
MK 5.5 FK 7.5 upon request
electrical specifications nominal voltage
options
Un Un DC AC
DC 24 V +5%/-10% special voltage upon request
AC 230 V +5%/-10% 40-60 Hz special voltage upon request direct-current magnet
direct-current magnet with integrated above 100 °C with separate rectifier
rectifier
insulating rating protection energized duty rating connection
H IP65 ED
180°C
optional additional equipment current consumption
M12x1
connector acc. DESINA illuminated plug with varistor
DC 24 V 1.56 A
AC 230 V 40-60 Hz 0.16 A
actuation
If order or application specifications are incomplete or imprecise there exists
a risk of an incorrect technical design of the valve for the required application.
As a consequence, the physical and / or chemical properties of the materials or
seals used, may not be suitable for the intended application. To avoid hydraulic
shocks in pipelines, the flow velocities must be taken into account when
designing valves for liquids.
b a b
operating principle
function pressure range
The valves‘ technical design is based on media and application requirements.
This can lead to deviations from the general specifications shown on the data
sheet with regards to the design, sealing materials and characteristics.
b a b
100% plug acc. DIN EN 175301-803 form A, 4 terminal box M16x1,5 positions x90° / wire diameter 6-8 mm
N-coil H-coil
DC 24 V 2.24 A
AC 230 V 40-60 Hz 0.28 A terminal box M16x1,5
II 3G Ex ec IIC T3 Ta -20…+80°C Gc
II 3D Ex tc IIIC T195°C Ta -20…+80°C Dc
II 3G Ex h IIC T3 Gc
II 3D Ex h IIIC T195°C Dc normally open-PNP normally open-PNP single pole double throw-SPDT
explosion proof
limit switches
connector acc. VDMA
inductive (I) inductive (B) mechanical
■ specifications not highlighted are standard specifications highlighted in grey are optional
müller co-ax gmbh
•
Friedrich-Müller-Str. 1
•
74670 Forchtenberg
•
Germany
•
fon +49(0)7947/828-0
•
fax +49(0)7947/828-11
•
Email [email protected]