Repuestos industriales y soluciones de ingeniería desde 2001.
Gestra MK35-2S
Fichas Técnicas / Documentación del Producto
| Marca |  |
| Categoría | Otros |
| Nombre del producto | Gestra MK35-2S |
| Código de producto | No especificado |
¡Ponte en contacto con nosotros! En 24 horas laborables (excepto fines de semana y festivos) confirmaremos el estado del inventario y el plazo estimado de entrega.
Descripción del producto
Los productos Gestra, incluido Gestra MK35-2S, se obtienen a través de canales de importación paralela y se entregan a nuestros clientes en United States con rapidez y fiabilidad. Imtek Engineering ofrece piezas originales Gestra a precios competitivos. Aunque Gestra MK35-2S no figure en nuestro sitio web, puede solicitar una cotización en cualquier momento y nuestro equipo le responderá en breve.
United StatesThermostatic Steam Trap
MK 35/2S, MK 35/2S3 PN40/CL300
DN 25, NPS 1" Description Thermostatic steam traps with corrosion resistant 5H2 membrane regulator capsule, unaffected by water hammer and with
flat seal. With integral strainer. Installation in any position.
The “H” version discharges the condensate supercooled to approx. 5 K. The superheating of the steam at the membrane
regulator capsule must not exceed 5 °C.
Design
MK 35/2S With two 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1100 kg/h at Δp 5 bar.
MK 35-2S, MK 35-2S3
MK 35/2S3 With three 5H2 membrane regulator capsules. For condensate flowrates up to e.g. 1700 kg/h at Δp 5 bar
Fluids The equipment is designed for the following fluids (in accordance with the EU Pressure Equipment Directive or Pressure
Equipment (Safety) Regulations in the UK):
MK 35/2S, MK 35/2S3 ■
Group 2 fluids
Chemical and corrosive influences must be taken into consideration.
Use in potentially explosive atmospheres The equipment does not have its own potential source of ignition (as per ATEX Directive). Please note the following:
Once installed, static electricity may arise between the equipment and the connected system. If the equipment is used in
potentially explosive atmospheres, the plant manufacturer or owner is responsible for discharging or preventing possible
static charge.
If it is possible for fluid to escape, e.g. through actuating mechanisms or leaks in threaded joints, the plant manufacturer or
owner must take this into consideration when dividing the area into zones.
Function
MK 35-2S
The equipment is used for discharging condensate from steam or for venting steam lines.
The condensate is discharged by two or three membrane regulator capsules and associated nozzle holder insert.
Material Component
EN
Body, cover
1.0460
SA105
Screw
1.7225
A193 B7/SA193 B7
Gasket Membrane regulator capsule Other internal parts
MK 35-2S3
Connections ■ ■ ■ ■ ■ ■
Flange EN 1092-1 B1, PN 40 Flange ASME B 16.5, Class 150 RF Flange ASME B 16.5, Class 300 RF
Screwed socket ISO 228-1, G Screwed socket ASME B 16.11, NPT Socket-weld end DIN EN 12760/ASME B 16.11, CL 3000
ASTM/ASME
Graphite/CrNi Hastelloy®/Stainless steel Stainless steel
Preguntas Frecuentes
Preguntas frecuentes sobre Gestra MK35-2S de Gestra. Imtek Engineering está listo para ayudarle a adquirir Gestra MK35-2S de Gestra en United States.
Imtek Engineering obtiene productos originales de Gestra a través de canales de suministro de confianza y los ofrece a clientes en United States a precios competitivos.
