Resistive material-moisture measuring device with integrated measuring pins
HIGHLIGHTS:
494 characteristic curvesincl. calibration protocol
GENERAL:
The measuring pins integrated on the reinforced front numerous measurings can be done without additional accessories.
For measuring of very hard materials we suggest the components shown at the accessories section.
SPECIFICATIONS:
Measuring principle
Moisture:
resistive material-moisture measuring according to DIN EN 13183-2: 2002
Temperature internal:
NTC
Curves:
494 material characteristics
Measuring range
Moisture:
0.0 ... 100.0% moisture content
0.0 ... 50.0% water content (depending on characteristic curve)
Temperature:
-25.0 ... +50.0 ° C (-13.0 ... +122.0 ° F)
Estimation:
in 9 steps (dry ... wet)
Resolution:
0.1% or 0.1 ° C (0.1 ° F)
Accuracy device (at nominal temperature = 25 ° C)
wood:
± 0.2% moisture content (deviation from characteristic curve at range 6 ... 30%)
building material:
± 0.2% moisture content (deviation from characteristic curve)
Scope of supply:
Device, battery, calibration protocol, manual
