Honsberg HD2K-020GM025 Flow Switch

Electrical connection
Flow Switch HD2K
Materials medium-contact
Non-mediumcontact materials Weight Installation location
plug DIN 43650-A / ISO 4400 Optionally for round plug connector M12x1, 4-pole
Brass construction:
Stainless steel CW614N nickelled, construction: 1.4571, CW614N, 1.4310, 1.4404, 1.4310, hard
hard ferrite, NBR ferrite PTFE-coated, FKM PA, CW614N, NBR see table "Dimensions and weights"
Standard: horizontal inwards flow from the left; other installation positions are possible;
the installation position affects the switching point and range.
Ranges For switching ranges, the details in the table correspond to horizontal inwards flow and decreasing flow rate; for display ranges
they correspond to horizontal inwards flow and increasing flow rate.
● High switching power ● Compact design ● viscosity stabilized
Viscosity compensated type HD2K Switching Optionally range Display range
Characteristics Mechanical flow switch, for fluid or gaseous media, with
spring-supported piston and magnetic triggering of a reed switch.
Robust construction in brass or stainless steel.
Technical data Switch Nominal width Process connection Switching range Pressure loss
Qmax.
Tolerance Pressure resistance Media temperature Ambient temperature Media
Wiring
reed switch
DN 8..25 female thread G 1/4..G 1 (further process connections available on
request) 0,5..60 l/min for details see 1,1..3.5 bar at Qmax.
table "Ranges" to 80 l/min ±5 % of full scale value
PN 200 bar optionally PN 500 bar
Qmax.
recommende d
l/min oil 30..330 mm²/s 0.5 - 8 1.5 - 15 2.5 - 25 6.0 - 40 12.0 - 60
0.5 - 10 1.5 - 20 2.5 - 30 6.0 - 45 12.0 - 65
30 12 22 35 60 80
Pressure loss bar at Qmax.
oil mm²/s
Viscosity stability
60
±8 %, min.
±0.3 l/min ±0.5 l/min ±0.8 l/min ±2.7 l/min ±3 l/min
100 205 330
1.1 1.4 2.2 2.3 1.9 2.0
1.6 2.4 2.1
2.8
3.5
2.3
2.1 2.3
2.4
2.6
2.9 2.6 2.8
Special ranges are available.
-20..+120 °C with display Z -20..+70 °C optionally -20..+150 °C -20..+70 °C
oil changeover No. 0.213 1
2
3
3
1
2
optionally changeover No. 0.282 optionally red or red / green diode in the
DIN 43650-A plug max. 175 V DC / 120 V AC Max. 0.25 A DC / 0.18 A AC max. 5 W / VA
Switching voltage Switching current Switching capacity Protection class 2 - Safety insulation
Ingress protection IP 65
dsh_fam_hd2k_en_vs01
1