Large 3-digit LED display.
User friendly keypad programming.
SelectableADD, SUBTRACT orADD / SUBTRACT count modes.
Separate up and down count inputs inADD / SUBTRACT mode 1.
Separate count and count direction inputs inADD / SUBTRACT mode 2.
Dividing prescale programmable from 1 to 250.
Relay hold time programmable from 0,1 to 25 seconds in 0,1 second
increments.
High speed count input (1kHz) with selectable positive or negative active
edge.
Independent low speed count input (30Hz).
Count input overspeed indication.
LED indication of relay output and both count inputs.
Error message for indication of power supply interruption of less than 1
second.
Reset achieved via front panel push-button, via external switch or via NPN
sensor.
Gate input for ignoring high speed count input pulses.
DC ( NPN/PNP) or Namur sensor compatible high speed and gate inputs
(order option).
Sensor leads can be connected directly as the SC-700 has an internal power
supply.
Output: 10ASPDT Relay or Solid State Relay (order option).
Retention of displayed and programmed parameters for 10 years using an
EEPROM.
Tamper-proof keylock feature for protection of programmed parameters.
11 Pine plug-in format.
