Repuestos industriales y soluciones de ingeniería desde 2001.
SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder
Fichas Técnicas / Documentación del Producto
- No hay documentación técnica disponible para este producto en este momento. Contáctenos para obtener más información.
| Marca |  |
| Categoría | Encoder |
| Nombre del producto | SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder |
| Código de producto | PRF08-C1AM0340 |
¡Ponte en contacto con nosotros! En 24 horas laborables (excepto fines de semana y festivos) confirmaremos el estado del inventario y el plazo estimado de entrega.
Descripción del producto
Los productos SICK, incluido SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder, se obtienen a través de canales de importación paralela y se entregan a nuestros clientes en United States con rapidez y fiabilidad. Imtek Engineering ofrece piezas originales SICK a precios competitivos. Aunque SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder no figure en nuestro sitio web, puede solicitar una cotización en cualquier momento y nuestro equipo le responderá en breve.
United States- PERFORMANCE - PRF
Measurement range 0 m ... 3 m Encoder Incremental encoders Resolution (wire draw + encoder) 0.03 mm 1) 2) Repeatability ≤ 1 mm 3) Linearity ≤ ± 2 mm 3) Hysteresis ≤ 2 mm 3) - 1) The values shown have been rounded.
- 2) Example calculation based on the PRF08 with HTL Push Pull: 200 mm (wire draw length per revolution - see Mechanical data): 2,000 (pulses per revolution) = 0.1 mm (resolution of wire draw + encoder combination).
- 3) Value applies to wire draw mechanism.
- INTERFACES - PRF
Communication interface Incremental / TTL
RS-422
Programmable/configurable ✔ Factory setting The built-on DFS60 encoders are programmed to the specified number of lines and interface prior to delivery. The electrical interface (TTL/HTL) and the number of lines (up to max. 10,000 lines) can be set in accordance with customer requirements with our programming devices for DFS60 encoders, which are available separately.
- ELECTRICAL DATA - PRF
Connection type Male connector, M23, 12-pin, radial Supply voltage 10 V ... 32 V Power consumption ≤ 0.7 W (without load) MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 1) - 1) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
- MECHANICAL DATA - PRF
Weight 1.8 kg Measuring wire material Highly flexible stranded steel 1,4401 stainless steel V4A Weight (measuring wire) 7.1 g/m Housing material, wire draw mechanism Aluminum (anodized), zinc die cast Spring return force 6 N ... 14 N 1) Length of wire pulled out per revolution 200 mm Life of wire draw mechanism Typ. 1,000,000 cycles 2) 3) Actual wire draw length 3.2 m Wire acceleration 40 m/s² Operating speed 8 m/s Mounted encoder DFS60, DFS60B-S1MA10000, 1056866 Mounted mechanic MRA-F080-103D2, 6030125 - 1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures.
- 2) Average values, which depend on the application.
- 3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.
- AMBIENT DATA - PRF
EMC According to EN 61000-6-2 and EN 61000-6-3 Enclosure rating IP64 Operating temperature range –30 °C ... +70 °C
- CLASSIFICATIONS
ECl@ss 5.0 27270590 ECl@ss 5.1.4 27270590 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270590 ECl@ss 8.0 27270590 ECl@ss 8.1 27270590 ECl@ss 9.0 27270590 ECl@ss 10.0 27270613 ECl@ss 11.0 27270503 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
Preguntas Frecuentes
Preguntas frecuentes sobre SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder de SICK. Imtek Engineering está listo para ayudarle a adquirir SICK 1034897 type: PRF08-C1AM0340 Wire draw encoder de SICK en United States.
Imtek Engineering obtiene productos originales de SICK a través de canales de suministro de confianza y los ofrece a clientes en United States a precios competitivos.
