Repuestos industriales y soluciones de ingeniería desde 2001.
Stuwe HSD 200-22 x 200 Shrink Disc
Fichas Técnicas / Documentación del Producto
| Marca | |
| Categoría | Otros |
| Nombre del producto | Stuwe HSD 200-22 x 200 Shrink Disc |
| Código de producto | HSD 200-22 x 200 |
¡Ponte en contacto con nosotros! En 24 horas laborables (excepto fines de semana y festivos) confirmaremos el estado del inventario y el plazo estimado de entrega.
Descripción del producto
Los productos Stüwe, incluido Stuwe HSD 200-22 x 200 Shrink Disc, se obtienen a través de canales de importación paralela y se entregan a nuestros clientes en United States con rapidez y fiabilidad. Imtek Engineering ofrece piezas originales Stüwe a precios competitivos. Aunque Stuwe HSD 200-22 x 200 Shrink Disc no figure en nuestro sitio web, puede solicitar una cotización en cualquier momento y nuestro equipo le responderá en breve.
United StatesIntended Use The shrink disc type HSD is designed for friction-type, fixed, non-switchable, removable shaft-hub connections for cylindrical
shafts. The limits of use are restricted as follows while taking into consideration any
forms of reasonably foreseeable misuse:
Compliance with the technical data in accordance with the product catalogue
and customer drawing Temperature range:
The standard products may be used in a range from -20°C to +100°C. Please
pay attention to the separate specifications for special products.
Material properties:
The system used of a shaft and hub must have the required yield strengths
(see catalogue).
Surface quality:
The surface roughness (Ra) of the shaft and hub system used should be lower
than 3.2µm.
Ambient conditions:
Standard products are not able be used in corrosive, fluid or gaseous environments. Please pay attention to
the separate specifications for special products.
20
Time Limits A time limit cannot be determined for the product.
Attention should be paid to the following information:
Re-lubrication is not necessary before re-tensioning.
The cone surfaces between the outer and inner rings of the shrink disc must
be cleaned and re-lubricated where there is soiling The locking bolts must be replaced
before reassembly.
Preguntas Frecuentes
Preguntas frecuentes sobre Stuwe HSD 200-22 x 200 Shrink Disc de Stüwe. Imtek Engineering está listo para ayudarle a adquirir Stuwe HSD 200-22 x 200 Shrink Disc de Stüwe en United States.
Imtek Engineering obtiene productos originales de Stüwe a través de canales de suministro de confianza y los ofrece a clientes en United States a precios competitivos.
