im-tek.com

Felm FA3-90S-4 Motor

Felm

Product Code: FA3-90S-4
Brand: Felm



GET OFFER: info@imtek.com.tr

Description for Felm FA3-90S-4 Motor

Efficiency  Classes  of  Motors  and  Measuring  Methods   The   “efficiency”   describes   how   efficiently   an   electric   motor   transforms   electrical   energy   into   mechanical   energy.   Previously   in   Europe,   low   voltage   three-­‐phase   motors   have   been   graded   and   marketed   in   three   efficiency  classes  –  EFF3,  EFF2  and  EFF1  –  based  on  a  voluntary  agreement  between  motor  manufacturers   and  the  European  Commission.   This   classifica-on   system   is   well   proven   and   has   now   been   adapted   in  many   countries   around   the   world.   Unfortunately,   other   countries   have   also   developed   their   own   na-onal   systems,   which   are   very   different   from   the     European   system.   That   was   the   reason   for   the   German  motor  manufacturers   in   ZVEI,   with   the   support   of   their   European   neighbours,   to   develop   an   energy   efficiency   standard   for   the   Interna-onal   Electrotechnical  Commission  (IEC).     The  objec-ve  was  to  have  a  common  interna-onal  standard  that  replaces  all  the  different  na-onal  systems.   This  project  was  successful  and  the  objec-ve  has  been  met.   The   new   interna-onal   standard,   IEC   60034-­‐30:2008,   defines   efficiency   classes   IE1,   IE2   and   IE3   for   three-­‐ phase  motors.     This  ensures  a  common  interna-onal  basis  for  the  design  and  classifica-on  of  motors  as  well  as  for  na-onal   legisla-ve    ac-vi-es.  At  the  same  -me,  the  IEC  developed  improved  methods  for  determining  the  efficiency   of  these  motors.   The  interna-onal  standards  IEC  60034-­‐30:2008  (classifica-on)  and  IEC  60034-­‐2-­‐1:2007  (measuring  methods)     have   been   adopted   as   European   standards   without   any   changes   as   EN   60034-­‐30:2009   and   EN   60034-­‐2-­‐1:2007.     For  the  sake  of  simplicity,  the  following  sec-ons  will  refer  to  the  IEC  standards  only.

Recommended Products For Felm


Felm FX 500XA-4 Motor
Felm FX 500XB-8 Motor
Felm FAA3-450F2-10P Motor
Felm FAA3-560F3-10P Motor
Felm F3 315M-2 Motor
Felm FX 560XC-8 Motor
Felm FAA3-500F2-08P Motor
Felm FA3-80 1-2 Motor
Felm FAA3-630F1-02P Motor
Felm FX 500XA-6 Motor
Felm F3 160L-2 Motor
Felm FAA3-450F3-12P Motor
Felm FAA3-560F4-06P Motor
Felm FAA3-630F2-04P Motor
Felm FX 560XB-12 Motor
Felm FAA3-560F1-02P Motor
Felm FX 500XC-6 Motor
Felm FAA3-450F2-08P Motor
Servomech SA 2 Linearmech Electromechanical Servoactuator
Eaton PRV1-10-C-0-6 Valve
Ru-Steel RSP 25000 RSP 8 Bolt Range with Spacer and Adaptors
Parker 30P110QVE2KS161 Duplex Filter
Westcode W1975MC720 Rectifier Diode
SKF W 617/8 Deep Groove Ball Bearing
American Industrial AB-1207-FP Heat Exchanger
Infineon G5B7 TT106N16KOF Thyristor Module
Gefran LT-F-0750-P L000X000A0N Potentiometer
Gefran WPG-A-A-0550-N 0000X000X00X0XX Magnetostrictives
ACL SRL S106 2/2 Direct Acting NC
Winsmith U1308SB56 RD Speed Reducer
KOYO 7300DB Angular contact ball bearings
Servomech SJ 1000 Mod A Screw Jack
Emotron FDU69-013-20 Drive
Kant 902-10-215 Pressure Switch
Holmatro 18 S 50 E Vari Pump
Gefran LT-M-0200-S 0000X000X0N Potentiometer
Hengesbach DIR 100/160 Differential pressure manometer with tube spring meter
Topworx 11-1111600 - 3/8Inch Side Sensing, SPDT, CSA, Brass With Black Lacquer Coating, Model 11 Go Switch
Edur NUB300A120L-3500 Single Stage Close-Coupled Pump
Topworx DXP-L41GNEB - 3/4Inch NPT, NAMUR 304 Stainless Steel, Aluminium, Standard 90°, D Series Valve Controller
Kadant 995.140/0001 RX Rotary Union
Meister KM-185-150 Flowmeter