Pièces détachées industrielles & solutions d'ingénierie depuis 2001.
Aron AM3RDP1C2004 Valve
Fiches Techniques / Documentation Produit
| Marque |  |
| Catégorie | Vanne |
| Nom du produit | Aron AM3RDP1C2004 Valve |
| Code produit | AM3RDP1C2004 |
Contactez-nous ! Nous revenons vers vous sous 24 heures ouvrées (hors week-ends et jours fériés) pour confirmer la disponibilité et le délai estimé.
Description du produit
Les produits Aron, dont Aron AM3RDP1C2004 Valve, sont sourcés via des canaux d'importation parallèle et livrés à nos clients en United States rapidement et en toute fiabilité. Imtek Engineering propose des pièces Aron authentiques à des prix compétitifs. Même si Aron AM3RDP1C2004 Valve n'est pas répertorié sur notre site, vous pouvez demander un devis — notre équipe vous répondra rapidement.
United StatesREDUCING / PRESSURE SEQUENCING VALVES CETOP 3
AM.3.RD / AM.3.SD...
SCREWS AND STUDS CH. IV PAGE 21
ORDERING CODE AM
Modular valve
3
CETOP 3/NG6
**
RD = Direct pressure reducing valve
SD = Direct pressure sequencing valve
*
Max. operating pressure: port P 350 bar Max. pressure adjustable 250 bar
Setting ranges:
spring 1 2 ÷ 30 bar spring 2 10 ÷ 120 bar spring 3 60 ÷ 250 bar Max. flow
40 l/min Internal drainage RD:
Positive overlap version 0,5 l/min Negative overlap version 2 l/min Hydraulic fluids
Mineral oils DIN 51524 Fluid viscosity 10 ÷ 500 mm2/s Fluid temperature -25°C ÷ 75°C
Ambient temperature -25°C ÷ 60°C Max. contamination level class 10 in accordance
with NAS 1638 with filter ß25≥75 Weight 1,3 Kg
PRESSURE - FLOW RATE AM3RD
Control on lines AM.3.RD version = A / P AM.3.SD version = P
PRESSURE - FLOW RATE AM3SD 3
*
1 = Positive overlap 2 = Negative overlap Omit for version AM3SD
2
Type of adjustment C = Grub screw V = Handwheel Setting ranges 1 = max. 2 ÷ 30 bar (white spring)
2 = max. 10 ÷ 120 bar (yellow spring) 3 = max. 60 ÷ 250 bar (green spring)
**
00 = No variant V1 = Viton
4
2
1
Relieving ←
*
P (bar)
3
*
Pr (bar)
4
AM3RD and AM3SD valves are direct acting spool type pressure reducing and sequencing units, respectively,
with one end pre-loaded by means of a spring an the other end exposed to
the hydraulic pressure.
The drainage is drained within the valve to port T. Pressure is adjustable
by means of a screw and locknut, or of a handwheel.Three types of springs
allow adjustment within the range 2÷250 bar. The pressure reducing valves are available in two versions:
with positive overlap (suitable with low flow rate) and with negative overlap to
obtain a greater pressure reinstatement speed.
Q (l/min)
1
Q (l/min)
The fluid used is a mineral based oil with a viscosity of 46 mm2/sec at 40 degrees C.
The tests have been carried out at with a fluid temperature of 40 degrees C.
HYDRAULIC SYMBOLS
Serial No.
AM.3.RD.A
OVERALL DIMENSIONS
AM.3.RD.P
Type of adjustment
AM.3.SD.P
V Handwheel C
Grub screw
Application example Support plane specifications
Questions Fréquentes
Questions fréquemment posées sur Aron AM3RDP1C2004 Valve de Aron. Imtek Engineering est prêt à vous aider à vous procurer Aron AM3RDP1C2004 Valve de Aron en United States.
Imtek Engineering s'approvisionne en produits Aron authentiques via des canaux d'approvisionnement fiables et les propose aux clients en United States à des prix compétitifs.
