The KL2631 output terminal has a relay which has a single contact. The relay contact is connected to the power contacts, which are suitable for use at up to 400 V AC, and can be generally used for switching devices requiring mains power. The Bus Terminal indicates its signal state by means of a light emitting diode. In order to use the high voltage of up to 400 V AC, the KL2631 must be supplied via the KL9190 power feed terminal.
Technical dataKL2631 | KS2631Number of outputs1 x make contacts for power contactNominal voltage400 V AC/300 V DCSwitching capacity DC300 V = 0.15 A; 24 V = 5 A; non-linearSwitching capacity AC1500 VASwitching voltage minimumpower contactLoad typeohmic, inductive, lamp loadMax. output current2 ASwitching currentswitching capacity DC: 300 V = 0.15 A; 24 V = 5 A; non-linear;
switching capacity AC: 1500 VAMinimum permitted loadno dataLamp test, electronic ballastno dataElectrical isolation500 V (K-bus/field potential)Current consumption power contactsonly loadCurrent consumption K-bustyp. 80 mABit width in the process image2 outputsOperating cycles mech. (min.)1 x 107Operating cycles electr. (min.)1.3 x 105 (2 A/250 V AC)Configurationno address or configuration settingSpecial features400 V contactWeightapprox. 85 gOperating/storage temperature0…+55 °C/-25…+85 °CRelative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. class/installation pos.IP 20/variablePluggable wiringfor all KSxxxx Bus TerminalsApprovalsCE, GL
