The KL6011 serial interface allows devices with a 20 mA current interface to be connected. The interface operates passively. The device connected to the KL6011 terminal communicates with the automation device via the Bus Coupler. The active communication channel operates independently of the higher-level bus system in full duplex mode at up to 19,200 baud. The current interface (TTY) guarantees high immunity to interference through electrically isolated signals with injected current.
Technical dataKL6011 | KS6011TechnologyTTYData transfer channels2 (1/1), TxD and RxD, full duplexData transfer rates1,200…19,200 baud; default: 9,600 baud, 8 data bits, no parity and one stop bitBit transfer2 x 20 mALoad< 500 ΩLine impedance–Cable lengthmax. 1,000 m twisted pairPower supplyvia the K-busCurrent consumpt. K-bustyp. 55 mACurrent consumption power contacts– (no power contacts)Electrical isolation500 V (K-bus/signal voltage)Data buffer128 bytes receive buffer, 16 bytes transmit bufferBit width in the process imageinput/output: 3 x 8 bit user data, 1 x 8 bit control/status (up to 5 x 8 bit user data are possible)Configurationno address setting, configuration via Bus Coupler or controllerSpecial features2 x 20 mA bit transferWeightapprox. 60 gOperating/storage temperature0…+55 °C/-25…+85 °CRelative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. class/installation pos.IP 20/variablePluggable wiringfor all KSxxxx Bus TerminalsApprovalsCE, UL, ExSpecial terminalsKL6011-0020standard format 5 bytes of user data
