Buhler AG UXM -56011-115 Linear Actuator

LA12| 22
Actuator with IC and Endstop Signals I/O specifications Input/Output
Specification
Comments
Violet
Mechanical slide potentiometer:
Max. 100 mm stroke
0-10 V
Linearity: ± 20 %
Slide potentiometer, 10 kohm
Minimum lifetime: 15,000 cycles Average lifetime: 40,000 cycles
1 kohm = 0 mm stroke 11 kohm = 100 mm stroke
Max. current output: 1 mA
The maximum effect: 0.1 W Analogue feedback:
0-10 V
(Option F)
0.5-4.5 V (Option K) Single Hall sensor:
2 pulses (Option L)
Tolerances: +/- 0.2 V Max. current output: 1 mA Ripple max.: 200 mV Transaction delay: 100 ms
Linear feedback: 0.5 % Max. current output: 12 mA Output = input -1 V
4 pulses (Option N) Actuator 12xLxx-1 12xNxx-1 12xLxx-2 12xNxx-2 12xLxx-3
12xNxx-3
mm per pulse 1 mm 0.5 mm 2 mm 1 mm 3 mm 1.5 mm
Dual Hall - 10 pulses XOR (Option S) Movement per single Hall pulse:
Actuator 12xSxx-1 12xSxx-2 12xSxx-3
Max. current output: 12 mA Output = input -1 V Min. on time: 2.5 ms
mm per pulse 0.2 mm 0.4 mm 0.6 mm
Frequency:
Frequency is 14-26 Hz on Single Hall output depending on load.
Every pulse is “ON” for minimum 3 ms.
Higher voltage on the motor can result in shorter pulses.
None
(Option D)
Go to table of contents
Not available with feedback or endstop out.