Pièces détachées industrielles & solutions d'ingénierie depuis 2001.
Celem MT SERIES Matching Transformers
Fiches Techniques / Documentation Produit
- Aucune documentation technique n'est disponible pour ce produit pour le moment. Contactez-nous pour plus d'informations.
Contactez-nous ! Nous revenons vers vous sous 24 heures ouvrées (hors week-ends et jours fériés) pour confirmer la disponibilité et le délai estimé.
Description du produit
Les produits Celem, dont Celem MT SERIES Matching Transformers, sont sourcés via des canaux d'importation parallèle et livrés à nos clients en United States rapidement et en toute fiabilité. Imtek Engineering propose des pièces Celem authentiques à des prix compétitifs. Même si Celem MT SERIES Matching Transformers n'est pas répertorié sur notre site, vous pouvez demander un devis — notre équipe vous répondra rapidement.
United StatesThe MT series creatively addresses the key characteristics of high quality matching transformers for high frequency / high power applications.
- The skin effect in the MT is negligible due to its unique laminar structure. Instead of the traditional copper tubes, the MT winding is made of laminar copper sheets. At 350 kHz this revolutionary structure reduces resistive losses by a factor of 10, and consequently increases overall efficiency to above 90%.
- The coupling coefficient of the MT is exceptionally high. Using alternating primary and secondary layers of thin copper sheets creates unprecedented coupling and very low reactive losses. The MT was designed to achieve zero stray inductance. This advanced design results in short circuit voltage of less than 10%, so that over 90% of the available reactive power is transmitted to the load.
- The MT completely avoids de-rating of specification when tapped, through an innovative yet simple combination of identical coil elements that are connected in series and parallel. This enables the transformation ratio to be modified quickly and without power reduction.
- The frequency range of the MT is exceptionally wide: 5 – 350 kHz. This is made possible by practically eliminating stray inductance, as well as by using high saturation ferrite.
| TYPE | MT 250 | MT 300 | MT 500 | MT 1000 | ||||||||
| Dimensions (L x W x H) | mm | 287.5 x 228 x125 | 287.5 x 228 x170 | 287.5 x 228 x170 | 287.5 x 228 x 260 | |||||||
| Weight | kg | 18 | 22 | 26 | 45 | |||||||
| Tapping | ratio | 3:1 | 4:1 | 2:1 | 6:1 | 3:1 | 2:1 | 12:1 | 6:1 | 4:1 | 3:1 | 2:1 |
| Max Primary voltage | Vrms | 600 | 800 | 1200 | 1200 | |||||||
| Max secondary current | A | 1500 | 2000 | 3000 | 6000 | |||||||
| Max primary current | A | 500 | 500 | 1000 | 500 | 1000 | 1500 | 500 | 1000 | 1500 | 2000 | 3000 |
| Reactive power transfer | % | > 90% | > 90% | > 90% | > 90% | |||||||
| Active efficiency | % | > 95% | > 95% | > 95% | > 95% | |||||||
| Max power | kVA | 250 | 300 | 500 | 1000 | |||||||
| Stray inductance | ?H | < 0.2 | < 0.3 | < 0.4 | < 1.5 | |||||||
| Frequency range | kHz | 20 - 350 | 20 - 350 | 20 - 350 | ||||||||
Questions Fréquentes
Questions fréquemment posées sur Celem MT SERIES Matching Transformers de Celem. Imtek Engineering est prêt à vous aider à vous procurer Celem MT SERIES Matching Transformers de Celem en United States.
Imtek Engineering s'approvisionne en produits Celem authentiques via des canaux d'approvisionnement fiables et les propose aux clients en United States à des prix compétitifs.
