Pièces détachées industrielles & solutions d'ingénierie depuis 2001.
Cemb T-NC/8-API/1/N Extension Cable
Fiches Techniques / Documentation Produit
| Marque |  |
| Catégorie | Câble |
| Nom du produit | Cemb T-NC/8-API/1/N Extension Cable |
| Code produit | T-NC/8-API/1/N |
Contactez-nous ! Nous revenons vers vous sous 24 heures ouvrées (hors week-ends et jours fériés) pour confirmer la disponibilité et le délai estimé.
Description du produit
Les produits Cemb, dont Cemb T-NC/8-API/1/N Extension Cable, sont sourcés via des canaux d'importation parallèle et livrés à nos clients en United States rapidement et en toute fiabilité. Imtek Engineering propose des pièces Cemb authentiques à des prix compétitifs. Même si Cemb T-NC/8-API/1/N Extension Cable n'est pas répertorié sur notre site, vous pouvez demander un devis — notre équipe vous répondra rapidement.
United StatesDISPLACEMENT TRANSDUCERS
T-NC FUNCTION
The T-NC transducers detect the displacement of a target facing to the probe. The different
dimensions of the probe allow its application for the detection of different measuring ranges.
They are powered at 24 Vdc and provide a 0÷10 Vdc or 4÷20 mA signal proportional to the
displacement.The transducer is used for no-contact measurement of displacement and expansion
of rotating machines. The probe structural features allow its installation in a particularly heavy
environment, with the presence of steam, oil and aggressive agents (typically on steam turbines,
gas turbines, compressors, etc.).
GENERAL DESCRIPTION
These transducers are composed of a ST-NC/16, ST-NC/20 or ST-NC/30 probe and a CT-NC
converter contained in a die-cast aluminium housing, complete with a connector (according to MIL standards)
for the connection of the transducer to the acquisition system.
The principle of operation is based on the generation of an electromagnetic high frequency field, radiated by
the probe, which induces an eddy current in the target. The intensity of this eddy current depends directly on
the distance between probe and target and it is converted into an electrical signal processed by the converter.
The probe consists of an AISI 304 stainless steel body and it is supplied with a coaxial teflon cable. The converter is manufactured with microprocessor
technology to ensure measurement linearity and precision. The generated electrical signal, depending on the distance between probe and target is
opportunely linearized during the transducer calibration phase.
It is supplied calibrated foreseeing the AISI 4140 target (calibration with different targets are available on request).
TECHNICAL FEATURES Composition T-NC
• AISI 304 stainless steel ST-NC probe
• CT-NC converter
Power supply
• 24 Vdc (20 to 30 Vdc)
External connections
• MIL C5015 5-pin connector (max conductors section 2,5 mm2)
Environmental application field
• Probe -50°C to +175°C
• Converter -20°C to +70°C
Measuring field
• Model 16
• Model 20
• Model 30
Linearity
• ± 2% for the entire measuring field and within the indicated operating temperatures
Insulation
• ≥108 Ω between signal and body/housing
Electrical connections
• Three-polar shielded cable, typical conductors section 3x1 mm2
Possible predispositions to the order
PROBE:
• Measuring field
• Cable length
• Cable armour
• Body length
4 mm from 0,5 to 4,5 mm 8 mm from 0,5 to 8,5 mm 13 mm from 0,5 to 13,5 mm
sensitivity 2,5V/mm sensitivity 1,25V/mm sensitivity 0,77V/mm
CONVERTER:
• Measuring field
• Cable length
• 0÷10V or 4÷ 20 mA output
B A L A N C I N G
M A C H I N E S
Questions Fréquentes
Questions fréquemment posées sur Cemb T-NC/8-API/1/N Extension Cable de Cemb. Imtek Engineering est prêt à vous aider à vous procurer Cemb T-NC/8-API/1/N Extension Cable de Cemb en United States.
Imtek Engineering s'approvisionne en produits Cemb authentiques via des canaux d'approvisionnement fiables et les propose aux clients en United States à des prix compétitifs.
