Pièces détachées industrielles & solutions d'ingénierie depuis 2001.
FSG PE-MH/1023-MU Series Tilt Angle Sensor
Fiches Techniques / Documentation Produit
| Marque | |
| Catégorie | Capteur |
| Nom du produit | FSG PE-MH/1023-MU Series Tilt Angle Sensor |
| Code produit | 5790Z03-032.003 |
Contactez-nous ! Nous revenons vers vous sous 24 heures ouvrées (hors week-ends et jours fériés) pour confirmer la disponibilité et le délai estimé.
Description du produit
Les produits FSG, dont FSG PE-MH/1023-MU Series Tilt Angle Sensor, sont sourcés via des canaux d'importation parallèle et livrés à nos clients en United States rapidement et en toute fiabilité. Imtek Engineering propose des pièces FSG authentiques à des prix compétitifs. Même si FSG PE-MH/1023-MU Series Tilt Angle Sensor n'est pas répertorié sur notre site, vous pouvez demander un devis — notre équipe vous répondra rapidement.
United States5790Z03-032.003 Pendulum Encoder
with oil-damped pendulum systems
Tilt angle values of a platform e.g. on
- cranes and heavy-duty vehicles
- excavators and drilling machines
- ships and offshore facilities
stand for important measuring data as a part of the safety and control system of that type of machinery. Angular measurement is, for instance for equipment levelling, performed in such cases by means of dual axis pendulum systems.
Single axis pendulum systems detect e.g.
- angular positions of a crane jib
- lateral inclination of a vehicle
- orientation of a lifting platform, weir trap or of comparable facilities
Transducers of that type contain inside a robust splash-proof aluminium case of protection degree IP 65 to IP 68 oil-damped pendulum systems, the tilt angle dependant swing of which is measured, depending on the application, either by a potentiometric, non-contact inductive or an optoelectronic angular encoder. For measurements relevant to safety, the pendulum swing per axis is detected with redundancy i.e. by means of two mechanically and electrically independent pendulum systems.
The output signal, representing the tilt angles, is provided either in form of an analog resistance, current or voltage variation or as a digital signal - with interface bus - as well.
For the application as tilt actuated switch e.g. on lifting platforms, crane vehicles or heeling control systems on board of cargo ships, uniaxial transducers can be provided with built-in min/max comparators.
For signal indication and limit monitoring of measured tilt angle values we offer:
- coordinate displays (x/y-indicators)
- min/max-switchgears
- signal converters for signal conversion and monitoring the resultant tilt angle value, derived from x- and y-axis
Resistance on angle limited by stops Resistance tolerance 2) Linearity tolerance 2)
Resolution Capacity Multiple design Functional winding Oilfilling Limit swichtes
Temperature coefficient 1)
• • --
also available with integrated slipping clutch
Series Max. active angle Stops at max.
Resistance on angle limited by stops Resistance tolerance Linearity tolerance
Resolution Capacity Multiple design Temperature coefficient 3)
2)
1)
PW 70 360° 350° min. 50 max. 50 k ±5% ± 0,2 up to 0, 15 % 0,3 up to <0, 1 %
6W sixfold • • version M... only
PW 613 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W sixfold • • • 17 ppm
PW 620 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W sixfold • • •
PW 1023 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W -• ---
constricted resistance and linearity tolerances possible
PW 609/611 340°
PW 613/620 345°
PW 0045 280°..345°
PW 55 345°
340°
345°
280°..345°
345°
min. 25 max. 20 k ±5% ± 0,5 % ± 0,5 % 0,5 W threefold
min. 25 max. 50 k ±5% ± 0,2 % ± 0,2 % 1W sixfold
min. 25 max. 50 k ±5% ± 0,5 % ± 0,2 % 1 ,5 W -17 ppm
min. 25 max. 50 k ±5% ± 0,5 % ± 0,2 % 1 ,5 W stackable
PW45W3/W10 3) W3 1080° W10 3600° W3 1080° W10 3600° min. 25 max. 50 k ±5%
± 0, 1 % 0, 1 up to 0,01 % 2W --
PW45W3 and PW45W10 are multi-turn potentiometers for 3 or 10 turns
Series Max. active angle Stops at max.
Resistance Resistance tolerance Linearity tolerance 4) Resolution Capacity
Multiple design Temperature coefficient 4)
PW 45 360° 345° min. 25 max. 20 k ±5% ± 0,3 up to 0,2 % 0,5 up to <0, 1 %
2,5 W twofold
± 2° ± 2°
PK 609 340° 340° 1 , 2 or 5 k ± 20 % ± 0,5 %
PK 611 347° 345° 1 , 2 or 5 k ± 20 % ± 0,5 %
PK 613 352° 345° 1 , 2 or 5 k ± 10 % ± 0,2 %
PK 620 355° 345° 1 , 2 or 5 k ± 10 % ± 0, 1 %
PK 1023 355° not limited by stops 1 , 2 or 5 k ± 10 % ± 0, 1 %
0,5 W threefold
0,5 W threefold
1W sixfold 200 ppm
1W sixfold
1W twofold
favourably priced version with ± 1 - 2 % available
Series Voltage output Load resistance Current output Load resistance Supply voltage
Current consumption 4 wires galvanically isolated 2, 3 or 4 wires Temperature coefficient
Linearity General data Temperature coefficient Testing voltage
EMC test according to
PW/PK620-MU PW/PK1023-MU 0–10 and 2–10 V respec.
500 0–20 and 4–20 mA respec.
600 18–33 V DC approx. 80 mA -• • • • • • max. 1 ‰ / 10K, typically: 0,5 ‰ / 10K •
± 0,2 % ± 0, 1 % ± 0, 1 %
PW/PK613-MU --
–30 up to +70 °C 550 V, 50 Hz, 1 min.
DIN 50 081-1 Generic Emission Standard
DIN 50 082-2 Generic Immunity Standard
zero point and steepness to be matched via trimmer mA V
0% mA V
0%
Questions Fréquentes
Questions fréquemment posées sur FSG PE-MH/1023-MU Series Tilt Angle Sensor de FSG. Imtek Engineering est prêt à vous aider à vous procurer FSG PE-MH/1023-MU Series Tilt Angle Sensor de FSG en United States.
Imtek Engineering s'approvisionne en produits FSG authentiques via des canaux d'approvisionnement fiables et les propose aux clients en United States à des prix compétitifs.
