Goulds FNPM Sealless Process Pump
Product Code:FNPM
Description
Magnetic drive pump in plastic
Pumps type FNPM are horizontal, single-stage, end-suction, top-discharge centrifugal pumps with magnetic coupling, dimensioned to comply with standards EN 22858, ISO 2858, NF 44-121 and BS 5257.
The scope of application covers the wide fields of chemical processing and environmental technology where chemically aggressive fluids of various concentrations at up to 190°C are to be handled. The constant standardization of the drive components and the unique
magnetic cartridge reduce the variety of parts and enable cost-saving stocking concepts. The magnet cartridge is a pre-assembled,
ready-to-use unit containing all core components of the magnetic drive pump (e.g. plain bearings, impeller and containment shells). Replacement takes only a few minutes - then the old unit can be reconditioned.
The cost advantage over the usual quick-coupler unit: up to 25%.
• Capacities to 350 m³/h | 1541 GPM
• Heads to 100 m | 328 ft
• Temperature ranges from
-40 °C to 190 °C | -40 °F to 374 °F
• Pressures to 16 bar | 232 PSIG
Applications:
• Hot Acids
• Acetic Acid
• Chlorinated Solvents
• Chloroform
• Steel Industry
• Acetone
• Hydrofluoric Acid
• Sodium Hypochlorite
• Nitric Acid
• Amines
• Chlorine Dioxide
• Flue gas scrubber
• Waste plants Incineration
Materials:
• PFA
• PTFE
Technical Specifications
Magnetic drive pump in plastic
Pumps type FNPM are horizontal, single-stage, end-suction,
top-discharge centrifugal pumps with
magnetic coupling, dimensioned to comply with standards EN 22858, ISO 2858, NF
44-121 and BS 5257.
The scope of application covers the wide fields of chemical processing and environmental technology where chemically aggressive fluids of various concentrations at up to 190°C are to be handled. The constant standardization of the drive components and the unique
magnetic cartridge reduce the variety of parts and enable cost-saving stocking concepts. The magnet cartridge is a pre-assembled,
ready-to-use unit containing all core components of the magnetic drive pump (e.g. plain bearings, impeller and containment shells). Replacement takes only a few minutes - then the old unit can be reconditioned.
The cost advantage over the usual quick-coupler unit: up to 25%.
• Capacities to 350 m³/h | 1541 GPM
• Heads to 100 m | 328 ft
• Temperature ranges from
-40 °C to 190 °C | -40 °F to 374 °F
• Pressures to 16 bar | 232 PSIG
Applications:
• Hot Acids
• Acetic Acid
• Chlorinated Solvents
• Chloroform
• Steel Industry
• Acetone
• Hydrofluoric Acid
• Sodium Hypochlorite
• Nitric Acid
• Amines
• Chlorine Dioxide
• Flue gas scrubber
• Waste plants Incineration
Materials:
• PFA
• PTFE