ECS Control System AC-IN DC-OUT 12-0/P
The ECS Control System is an intelligent controller developed to provide flexible solutions for economical filter life by minimising the costs associated with maintaining and operating modern dust filtration systems. The integrated dP transducer allows the controller to determine exactly when filters require cleaning. This feature ensures the filters are cleaned only when necessary, dramatically extending filter life and lowering emissions, while significantly reducing compressed air use. The ECS base board has 12 solenoid outputs on board. The addition of expansion cards, matched to the AC or DC output of the controller, increases this number to 360 outputs. The ECS may be ordered as the control board only or in an enclosure (polycarbonate).
Features & Specifications:
DP SUPPORT 0 to 4.5 kPa
INPUT VOLTAGE AC: 100/240 V @ 50/60 Hz
OUTPUT VOLTAGE AC: 100/240 V @ 50/60 Hz (same as input). DC: 24 V
MAXIMUM INPUT POWER AC IN, AC OUT Model: 235 W. AC IN, DC OUT Model: 65 W
DISCRETE SOLENOID OUTPUTS 12 outputs, expandable up to 360 via 12 output expansion cards
PROTECTION RATING Polycarbonate: IP65 & NEMA 1, 4, 4X, 12 & 13
OPERATING TEMPERATURE ?40°C to 60°C (?40°F to 140°F)
ON & OFF TIME ON: 30 ms to 1000 ms, OFF: 1 s to 1000 s
INPUTS Voltage Free: Fan Stop, Low Header Alarm, Demand/Continuous
OUTPUTS Voltage Free: Coil is Firing, Coil Alarm, High dP. Analogue Output: 4–20 mA dP signal
High-performance, cost-minimising controller.
Expansion cards extend the control up to 360 solenoid outputs.
Quick Pulse Technology
Each AC output can have 10 pilot valves connected in parallel, enabling up to 3600 pilot valves to be supported. Each DC output can have 2 pilot valves connected in parallel between ?40°C to 60°C (?40°F to 140°F), enabling up to 720 pilot valves to be supported.
The main PCB only can have 3 DC pilot valves connected in parallel between ?20°C to 60°C (?4°F to 140°F).
Low temperature operation ?40°C (?40°F)
Automatic pilot valve detection
Voltage-free coil error output and a visual indication on the display showing which pilot valve output has an error, enabling quick fault finding and debugging.
Conforms to the requirements of UL, CE, FCC and RCM.
