Gap free process connection for temperature measurement without process opening. Suitable for pipes from DN10 on.
With the ESP installation system, an thermowell is permanently installed in the process. The slim tip of the sensor is inserted into this thermowell and held in contact by a spring. It is therefore not in direct contact with the medium.
The sensor can be removed at any time for recalibration or replacement, without electrical disconnection and without opening the process, and consequently without necessity to shut down the plant or to stop the process.
Variable: Installation in tanks using welding sockets or adapters. Installation in pipes using tees or elbows with integrated thermowellsOne for all: One sensor type with the same probe length can be used for differing pipe widths, thus minimizing spare parts inventory and planning requirementsTailored to requirements: Special design for pharmaceutical applicationsTechnical SpecificationProcess ConnectionPHARMadapt ESP Weld-in thermowells | Adapters | Pipe Tees | Pipe elbowsWetted material1.4435 (316L) | Ra ? 0,8 ?m / 0,6 ?m / 0,4 ?mAvailable versionsFor temperature sensors TFP with head 50 or 18 mm for PHARMadapt ESP
