Pièces détachées industrielles & solutions d'ingénierie depuis 2001.
SKF TIH 220m Large Induction Heater
Fiches Techniques / Documentation Produit
- Aucune documentation technique n'est disponible pour ce produit pour le moment. Contactez-nous pour plus d'informations.
| Marque |  |
| Catégorie | Autres |
| Nom du produit | SKF TIH 220m Large Induction Heater |
| Code produit | TIH 220m |
Contactez-nous ! Nous revenons vers vous sous 24 heures ouvrées (hors week-ends et jours fériés) pour confirmer la disponibilité et le délai estimé.
Description du produit
Les produits SKF, dont SKF TIH 220m Large Induction Heater, sont sourcés via des canaux d'importation parallèle et livrés à nos clients en United States rapidement et en toute fiabilité. Imtek Engineering propose des pièces SKF authentiques à des prix compétitifs. Même si SKF TIH 220m Large Induction Heater n'est pas répertorié sur notre site, vous pouvez demander un devis — notre équipe vous répondra rapidement.
United StatesThe SKF large induction heater TIH 220m is a reliable and robust induction heater from the SKF TIH...m range. It is suitable for heating bearings up to a maximum weight of 300 kg (660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs).
Advanced design of the power electronics including current and overheating control, combined with user friendly features such as sliding arms and remote control are standard to the TIH...m range.
Maximum efficiency is achieved by placing the induction coil outside the heater’s housing, in the centre of the bearing,resulting in shorter heating time and lower energy consumption.
The LED operating display and control panel are integrated in a remote control, which makes the heater easy to use. To suit different operating voltages worldwide, the TIH 220m is available in different voltage variants.
| Designation | TIH 220M/LV | |
| TIH 220M/MV | ||
| SKF m20 performance | 220 kg (480 lbs) | |
| Voltage, V/Hz | TIH 220M/LV: 200-230V/50-60Hz | |
| TIH 220M/MV: 400-460V/50-60Hz | ||
| Bearing: | - Maximum weight | 300 kg (661.4 lb) |
| - Maximum bore diameter | 60 - 600 mm (2.3 - 23.6 in.) | |
| Temperature control: | - Range * | 0 - 250 °C (32 - 482 °F) |
| - Magnetic probe | Yes, K-type | |
| - Accuracy (electronics) | ± 2 °C (± 3.6 °F) | |
| Time control: | - Range | 0 - 60 minutes |
| - Accuracy | ± 0,01 sec. | |
| Performance example: | - bearing, weight, temperature, time | 23172 CC/W33, 220 kg, 110 °C, 20m |
| Thermometer mode | Yes | |
| Bearing mode (pre-set at 110 °C/230 °F) | Yes | |
| Power reduction | 2-step; 50 - 100% | |
| Demagnetisation according to SKF norms (automatic) | Yes (<2 A/cm) | |
| Can heat sealed bearings | Yes | |
| Can heat pre - greased bearings | Yes | |
| Error guiding codes | Yes | |
| Thermal overload protection | Yes | |
| Maximum magnetic flux | 1,55 T | |
| Control panel | Key board with LED in remote control | |
| Operating area (w × h) | 250 × 255 mm (9.8 × 10 in.) | |
| Coil diameter | 140 mm (5.5 in.) | |
| Dimensions (w × d × h) | 750 × 290 × 440 mm (29.5 × 11.4 × 17.3 in.) | |
| Total weight, including yokes | 86 kg (189 lbs) | |
| Maximum power consumption | 10,0-11,5 kVA (400-460V) | |
| Number of standard yokes | 2 | |
| Standard yokes | 70 × 70 × 430 mm (2.8 × 2.8 × 16.9 in.), for heating bearings with bore diameter of 100 mm (3.9 in.) and larger | |
| 40 × 40 × 430 mm (1.5 × 1.5 × 16.9 in.), for heating bearings with bore diameter of 60 mm (1.6 in.) and larger | ||
| Core cross section | 70 × 70 mm (2.8 × 2.8 in.) | |
| Yoke storage | Yes | |
| Sliding arm | Yes, 70 x 70 x 430 mm (2.8 x 2.8 x 16.9 in.) yoke only | |
| Swivel arm | No | |
| Cooling fan | No | |
| Housing material | Steel and glass fibre filled polyamide | |
| * Maximum heating temperature capacity depends on the weight and geometry of the bearing or workpiece. The heaters can achieve higher temperatures, please contact SKF for advice. | ||
| Designation | Description |
| TIH 220-Y4 | Yoke 28 x 28 x 430 mm (1,1 x 1,1 x 16,9 in) |
| TIH 220-YS | Support yoke set - 70 x 70 x 150 mm (2x) (2,8 x 2,8 x 5,9 in) |
| Designation | Description |
| TIH 220-Y6 | Standard yoke 40 x 40 x 430 mm (1,5 x 1,5 x 16,9 in) |
| TIH 220-Y10 | Standard yoke 70 x 70 x 430 mm (2,8 x 2,8 x 16,9 in) |
| TIH 220-RS | Roller support (incl. rollers and bearings) |
| TIH 220-SLDR | Sliding rails |
| TIH 220-PMV | Power print 400-460V, 50-60Hz |
| TIH 220-PLV | Power print 230V, 50-60 Hz |
| TIH CP | Control print |
| TIH RC | Remote control |
| TIH CB25A | Circuit breaker 25A for TIH 220m/MV |
| TIH CB50A | Circuit breaker 50A for TIH 220m/LV |
| TIH P20 | Temperature probe, K-type |
| TIH SNUBBER | Snubberboard |
| LGAF 3E/0.035 | Tube of anti-fretting paste for heater maintenance |
Questions Fréquentes
Questions fréquemment posées sur SKF TIH 220m Large Induction Heater de SKF. Imtek Engineering est prêt à vous aider à vous procurer SKF TIH 220m Large Induction Heater de SKF en United States.
Imtek Engineering s'approvisionne en produits SKF authentiques via des canaux d'approvisionnement fiables et les propose aux clients en United States à des prix compétitifs.
