Gestra NRG16-41.1 Image

Gestra NRG16-41.1


Product Name: Gestra NRG16-41.1
Brand: Gestra
Product Code: NRG16-41.1
Tags: Gestra Gestra NRG16-41.1 NRG16-41.1
Level electrode operation NRG16-41.1



Are you interested in the product Gestra NRG16-41.1 from manufacturer Gestra with code NRG16-41.1? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!

Get Offer With E-Mail: info@im-tek.com
Get a offer for Gestra NRG16-41.1 from our live support team now!

System Description The level electrode operation is based on the conductive measuring principle. The NRG 1...-41.1 is designed for signalling the max. liquid level in electrically conductive liquids. n One liquid level with one switchpoint The NRG 1...-41.1 is to be used in conjunction with the multi-purposed control equipment NRS 1-40.1. The level data are transferred from the electrode NRG 1...-41.1 to the control unit via a CAN bus using the CANopen protocol.Function The conductivity of the liquid is used to signal the liquid level. Some liquids are conductive, which means that they allow an electric current to flow through them. For the safe functioning of this device a minimum conductivity of the liquid to be measured is required. The conductivity measurement method can detect two conditions: electrode rod submerged or exposed, meaning switchpoint reached (or exceeded) or not yet reached. Before installation, the length of the electrode rod must be cut to the required switching level, e. g. for “Pump off” or “Control valve closed” or, in case of economiser and air heaters that are installed close to the steam-generating unit and exposed to a risk, “Firing/Burner off”. An additional electrode fully integrated in the system automatically monitors the electrical resistance path between earth and measuring electrode. As soon as the actual value falls below the admissible resistance value the protection circuit is interrupted and cuts off the pump or heat supply to the boiler. At regular intervals the level electrode NRG 1...-41.1 sends a data telegram to the switching controller NRS 1-40.1. The data are transferred via a CAN bus to DIN ISO 11898 using the CANopen protocol.