Industrial spare parts & engineering solutions since 2001.
Grundfos SP 46-17 Pump
Technical Datasheets / Product Documentations
| Brand |  |
| Category | Pump |
| Product Name | Grundfos SP 46-17 Pump |
| Product Code | SP 46-17 |
Contact with us! 24 business hours (excluding weekends and holidays) to confirm stock status and estimated delivery time.
Product Description
Grundfos products, including Grundfos SP 46-17 Pump, are sourced through parallel import channels and delivered to our customers worldwide with speed and reliability. As an authorized trading partner, Imtek Engineering offers genuine Grundfos parts at competitive prices. Even if Grundfos SP 46-17 Pump is not listed on our website, you are welcome to request a price quote — our team will respond promptly with a tailored offer.
during transportation.
If the pump is unpacked, store it horizontally, or vertically to prevent misalignment. Make sure that
the pump cannot roll or fall over. Support it if necessary.
During storage, the pump can be supported as indicated in the figure below.
4.2 Handling
WARNING Crushing of feet Death or serious personal injury ‐ Stack the pumps with the biggest at
the bottom, and do not stack above 1 m.
‐
‐
Use lifting equipment which is approved for the weight of the product.
Wear personal protective equipment.
WARNING Crushing of hands Death or serious personal injury ‐ Stack the pumps with the biggest at
the bottom, and do not stack above 1 m.
‐
Use lifting equipment which is approved for the weight of the product.
Store the pump in the package until it is ready for installation.
Handle the pump with care.
Fix the extra nameplate supplied with the pump at the installation site.
Do not expose the pump to mechanical impact, vibrations etc.
4.3 Storage 4.3.1 Storage temperature Pump: -4 to +140 °F (-20 to +60 °C).
Motor: -4 to +158 °F (-20 to +70 °C).
Store the motors in a closed, dry and well ventilated room.
If MMS motors are stored, the shaft must be turned by hand at least once a
month. If a motor has been stored for more than a year before installation,
the rotating parts of the motor must be dismantled and checked before use.
Do not expose the pump to direct sunlight.
8
TM001349
English (US)
4. Delivery, handling and storage
Pump position during storage 4.3.2 Frost protection If the pump has to be stored after use, it must be
stored on a frost-free location, or the motor liquid must be frost-proof.
5. Operating conditions Up to 1400 gpm
Flow rate, Q:
(318 m3/h)
Head, H:
Up to 2657 ft (810 m)
Liquid temperature:
32-140 °F (0-60 °C)
Maximum submersible depth:
MS 402
492 ft (150 m) (213 psi)
MS 4000
1969 ft (600 m) (852 psi)
MS 6000
1969 ft (600 m) (852 psi)
All MMS
1969 ft (600 m) (852 psi)
Frequently Asked Questions
Frequently asked questions about Grundfos SP 46-17 Pump by Grundfos. Imtek Engineering is ready to assist you in sourcing Grundfos SP 46-17 Pump from Grundfos in United States.
United StatesImtek Engineering sources genuine Grundfos products through trusted supply channels and supplies them to customers in United States at competitive prices.
