Ricambi industriali e soluzioni ingegneristiche dal 2001.
- Prodotti
- B&R Automation
- Modulo
- B&R Automation X20CP1584 Module
B&R Automation X20CP1584 Module
Schede Tecniche / Documentazione Prodotto
| Marca | |
| Categoria | Modulo |
| Nome prodotto | B&R Automation X20CP1584 Module |
| Codice prodotto | X20CP1584 |
Contattaci! 24 ore lavorative (esclusi weekend e festivi) per confermare disponibilità e tempi di consegna.
Descrizione del prodotto
I prodotti B&R Automation, incluso B&R Automation X20CP1584 Module, vengono approvvigionati tramite canali di importazione parallela e consegnati ai nostri clienti in United States con rapidità e affidabilità. Imtek Engineering offre componenti originali B&R Automation a prezzi competitivi. Anche se B&R Automation X20CP1584 Module non è elencato sul nostro sito, è possibile richiedere un preventivo in qualsiasi momento — il nostro team risponderà tempestivamente.
Horizontal Vertical Installation elevation above sea level 0 to 2000 m >2000 m
Degree of protection per EN 60529 Ambient conditions Temperature Operation
Horizontal mounting orientation Vertical mounting orientation Derating Storage
Transport Relative humidity Operation Storage Transport Mechanical properties
Note
Dimensions Width Height Depth Weight
X20CP1583
X20CP1584
X20cCP1584
X20CP1585
X20CP1586
X20cCP1586
Yes Yes No limitation Reduction of ambient temperature by 0.5°C per 100 m
IP20
-25 to 60°C -25 to 50°C See section "Derating".
-40 to 85°C -40 to 85°C 5 to 95%, non-condensing
Up to 100%, 5 to 95%, non-condensing condensing 5 to 95%, non-condensing
5 to 95%, non-condensing
Up to 100%, condensing
Order application memory (CompactFlash) separately Backup battery included in delivery
X20 end cover plate (right) included in delivery 12-pin X20 terminal block included in delivery
Interface module slot covers included in delivery 150 mm 99 mm 85 mm 400 g
Table 2: X20CP1583, X20CP1584, X20cCP1584, X20CP1585, X20CP1586, X20cCP1586 - Technical data
1) 2) 3) 4) 5) 6) 7)
For details about storage health data, see Automation Help.
The specified values are maximum values. For examples of the exact calculation, see section "Mechanical and electrical configuration" in the X20 system
user's manual.
When operated at temperatures above 55°C, a derating of the nominal output power to 5 W for the X2X Link power supply must be taken into account.
In parallel operation, it is only permitted to expect 75% of the nominal power. It is important to make sure that all power supply units operated in parallel
are switched on and off at the same time.
The memory size for remanent variables is configurable in Automation Studio.
1 MB SRAM minus the configured remanent variables.
For additional information, see section "Communication / POWERLINK / General information / Hardware - IF/LS" in Automation Help.
Data sheet V 1.57
5
Domande Frequenti
Domande frequenti su B&R Automation X20CP1584 Module di B&R Automation. Imtek Engineering è pronta ad assisterla nell'approvvigionamento di B&R Automation X20CP1584 Module da B&R Automation in United States.
Imtek Engineering si approvvigiona di prodotti originali B&R Automation tramite canali di fornitura affidabili e li offre ai clienti in United States a prezzi competitivi.

