BECKHOFF EL3114 4-Channel Analog Input Terminal
Product Code:EL3114
Description
The EL3114 analog input terminal processes signals in the range between 0 and 20 mA. The current is digitised to a resolution of 16 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT Terminal have differential inputs and possess a common, internal ground potential. Overload condition is detected, and the terminal status is relayed to the controller via the E-bus. The EtherCAT Terminal indicates its signal state by means of light emitting diodes.
Technical dataEL3114 | ES3114Number of inputs4 (differential)Power supplyvia the E-busTechnologydifferential inputSignal current0…20 mAOversampling factor–Distributed clocksyesDistributed clock precision<< 1 µsInternal resistance85 Ω typ. + diode voltageInput filter limit frequency5 kHzCommon-mode voltage UCM10 V max.Conversion time~ 100 µsInput signal bandwidthsee input filterResolution16 bit (incl. sign)Measuring error< ±0.3 % (relative to full scale value)Surge voltage resistance35 V DCElectrical isolation500 V (E-bus/signal voltage)Current consumption power contacts–Current consumption E-bustyp. 130 mABit width in the process imageinputs: 16 byteConfigurationno address or configuration settingSpecial featuresstandard and compact process image, activatable FIR/IIR filters, limit value monitoringWeightapprox. 55 gOperating/storage temperature-25…+60 °C/-40…+85 °CRelative humidity95 %, no condensationVibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4Protect. class/installation pos.IP 20/variablePluggable wiringfor all ESxxxx terminalsApprovalsCE, UL, ExTechnical Specifications
The EL3114 analog input terminal processes signals in the range between 0 and 20 mA. The current is digitised to a resolution of 16 bits and is transmitted, electrically isolated, to the higher-level automation device. The input channels of the EtherCAT Terminal have differential inputs and possess a common, internal ground potential. Overload condition is detected, and the terminal status is relayed to the controller via the E-bus. The EtherCAT Terminal indicates its signal state by means of light emitting diodes.
| Technical data | EL3114 | ES3114 |
|---|---|
| Number of inputs | 4 (differential) |
| Power supply | via the E-bus |
| Technology | differential input |
| Signal current | 0…20 mA |
| Oversampling factor | – |
| Distributed clocks | yes |
| Distributed clock precision | << 1 µs |
| Internal resistance | 85 Ω typ. + diode voltage |
| Input filter limit frequency | 5 kHz |
| Common-mode voltage UCM | 10 V max. |
| Conversion time | ~ 100 µs |
| Input signal bandwidth | see input filter |
| Resolution | 16 bit (incl. sign) |
| Measuring error | < ±0.3 % (relative to full scale value) |
| Surge voltage resistance | 35 V DC |
| Electrical isolation | 500 V (E-bus/signal voltage) |
| Current consumption power contacts | – |
| Current consumption E-bus | typ. 130 mA |
| Bit width in the process image | inputs: 16 byte |
| Configuration | no address or configuration setting |
| Special features | standard and compact process image, activatable FIR/IIR filters, limit value monitoring |
| Weight | approx. 55 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals | CE, UL, Ex |