Cemb SR-6/C045/D045 Probe Holder Sensor

www.cemb.com
DISPLACEMENT TRANSDUCERS
T-NC/8-API The T-NC/8-API transducer measures the distance of a ferrous material from
the sensor head. The non-contact type measurement can be both dynamic for vibration measurement and static for displacements.
The measuring chain is composed by a proximity sensor, an extension cable and a converter.
The converter is inserted in a box and contains the electronics to power the sensor and
signal linearization. The operating principle is based on the generation of a high-frequency
electromagnetic field irradiated by the sensor which induces an eddy current in the target. The
intensity of this eddy current depends directly on the distance between the sensor and the
target and is converted into an electric signal processed by the converter.
The sensor is composed of a stainless steel body and a Teflon coaxial cable.
VIBRATION RL X Y
AXIAL POSITION
KEY PHASOR
ECCENTRICITY
VELOCITY
TECHNICAL CHARACTERISTICS Measuring Chain
ST-NC/8 sensor in AISI 304 stainless steel (To be ordered separately, see page 3)
CPT-NC/8 extension cable (To be ordered separately, see page 3) T-NC/8-API converter
Power supplies
-24 VDC nominal (-20 to -30 VDC range)
Connections
3-way screw terminal strip Miniature coaxial connector for sensor
Ambient operating range
Sensor:
Extension cable:
Converter:
Measurement type
Differential or linear displacement
Measurement range
Standard: ± 1mm (0,5 ÷ 2,5mm) @ 7.87 mV/um Special: ± 2mm (0,5 ÷ 4,5mm) @ 3.93 mV/um
Dynamic range
Frequency: 0 to 10,000 Hz
Output signal
Analogue
Linearity
± 1% (range 0,5 ÷ 2,5mm; T=100°C)
Nominal sensitivity
7.87 mV/µm (200 mV/mil) or 3.93 mV/μm (100mV/mil)
Output impedance
500 Ohm
Sensitivity to temperature
According to ANSI/API 670
-55°C to 180°C -55°C to 180°C -40°C to 80°C
(ATEX: -55°C to 175°C) (ATEX: -55°C to 175°C) (ATEX: -30°C to 80°C)
B A L A N C I N G
M A C H I N E S