Cemb T-NC/8-API Proximity Sensor
Product Code:T-NC/8-API
Description
The non-contact type measurement can be both dynamic for vibration measurement and static for displacements
The Proximity sensor is composed of an ST-NC/8 proximity sensor, a CPT-NC/8 extension cable and a T-NC-8/API converter.
The generated signal allows measurements of vibration, displacement, eccentricity and speed in the specific application.
The measuring chain is composed by a proximity sensor, an extension cable and a converter. The converter is inserted in a box and contains the electronics to power the sensor and signal linearization. The operating principle is based on the generation of a high-frequency electromagnetic field irradiated by the sensor which induces an eddy current in the target. The intensity of this eddy current depends directly on the distance between the sensor and the target and is converted into an electric signal processed by the converter. The sensor is composed of a stainless steel body and a Teflon coaxial cable
It is manufactured according to API standards and it is available also with different certifications: intrinsecally safe Atex, TP TC, IEC EX.
CompositionST-NC/8 sensor in AISI 304 stainless steelCPT-NC/8 extension cableT-NC/8-API converterPower supplies-24 VDC nominal (-20 to -30 VDC range)Connections3-way screw terminal stripMiniature coaxial connector for sensorAmbient operating rangeSensor: -35°C to +175°CExtension cable: -35°C to +175°CConverter: -35°C to +75°CMeasurement typeDifferentialMeasurement range± 1 mm (0.5 - 2.5 mm)Dynamic rangeFrequency: 0 to 10,000 HzOutput signalAnalogueLinearity± 1% over the entire measurement range and within the operatingNominal sensitivity200 mV/mil (7.87 mV/?m)Output impedance500 OhmSensitivity to temperatureAccording to ANSI/API 670SENSORThread typeBody lengthTotal sensor length (body + cable)Unthreaded part lengthCable armatureTechnical Specifications
Proximity sensor no contact
The T-NC/8-API transducer measures the distance of a ferrous material from the sensor head.
The non-contact type measurement can be both dynamic for vibration measurement and static for displacements
The Proximity sensor is composed of an ST-NC/8 proximity sensor, a CPT-NC/8 extension cable and a T-NC-8/API converter.
The generated signal allows measurements of vibration, displacement, eccentricity and speed in the specific application.
The measuring chain is composed by a proximity sensor, an extension cable and a converter. The converter is inserted in a box and contains the electronics to power the sensor and signal linearization. The operating principle is based on the generation of a high-frequency electromagnetic field irradiated by the sensor which induces an eddy current in the target. The intensity of this eddy current depends directly on the distance between the sensor and the target and is converted into an electric signal processed by the converter. The sensor is composed of a stainless steel body and a Teflon coaxial cable
It is manufactured according to API standards and it is available also with different certifications: intrinsecally safe Atex, TP TC, IEC EX.
| Composition | ST-NC/8 sensor in AISI 304 stainless steel |
| CPT-NC/8 extension cable | |
| T-NC/8-API converter | |
| Power supplies | -24 VDC nominal (-20 to -30 VDC range) |
| Connections | 3-way screw terminal strip |
| Miniature coaxial connector for sensor | |
| Ambient operating range | Sensor: -35°C to +175°C |
| Extension cable: -35°C to +175°C | |
| Converter: -35°C to +75°C | |
| Measurement type | Differential |
| Measurement range | ± 1 mm (0.5 - 2.5 mm) |
| Dynamic range | Frequency: 0 to 10,000 Hz |
| Output signal | Analogue |
| Linearity | ± 1% over the entire measurement range and within the operating |
| Nominal sensitivity | 200 mV/mil (7.87 mV/?m) |
| Output impedance | 500 Ohm |
| Sensitivity to temperature | According to ANSI/API 670 |
| SENSOR | |
| Thread type | |
| Body length | |
| Total sensor length (body + cable) | |
| Unthreaded part length | |
| Cable armature |