Conductix Wampfler IPT®-Rail Inductive Power Transfer

Track Supplies do convert mains voltages of usually 50 or 60 Hz into a higher frequent output voltage.

Usually IPT® systems are run at 15 or 20kHz. Only with this higher frequency of the output voltage and so the alternating magnetic field around the track cable an efficient non-contact power transfer becomes possible. Depending on the Regulators used on the secondary side track currents of 80 or 125 A are used.

Depending on the Track Supply design it is possible to adapt it to national mains voltages and to have different input and output signals, user interfaces, colours, etc..

Typical* Track Supplies:

Description**Nom. Power**6 kW Track Supply Module 80 A6 kW6 kW Track Supply Module 125 A6 kW16 kW Track Supply Module 80 A16 kW16 kW Track Supply Module 125 A16 kW35 kW Track Supply Cabinet 80 A35 kW35 kW Track Supply Cabinet 125 A35 kW

* for other sizes, output voltages and design please do contact Conductix-Wampfler
** for detailed product data please take the corresponding product documentation

Inductive Power Transfer