Dynisco Upr900-30000000 Process Indicator

Upr900-30000000 Process Indicator

Tagline
Mechanical & Packaging Characteristics Termination:
Front Panel:
Operating Temp:
Storage Temp:
Humidity:
Weight:
Screw terminals on rear IP65 with gasket (IP65 front USB connector) 32 to 122°F (0 to 50°C)
-4 to 158°F (-20 to 70°C) 85% relative humidity, non-condensing 1.43 lbs. (650g)
CE Mark:
Agency Approvals:
Self-certified to applicable standards UL
Power Supply (Mains) Input Power Mains Version:
Low Voltage Version:
Power Consumption:
Transmitter Power Supply:
100 to 240Vac, 50/60Hz switching 20 to 48 Vac 50/60Hz 25VA or 22 to 65Vdc 12W
15VA, max 24Vdc into 400Ω min, 60mA drive for 2-or 4-wire mA transmitters
Ordering Guide UPR900-X-X-X-X-X-X-X-X (Includes Retransmission) Relay/Alarms
0 = No Relays 2 = Dual Relays Independent Common 3 = 3 Single Relays 4 = 3 Relays (1 Single, 1 Dual – shared common)
2nd Strain Gauge Input/Setpoint w/2nd Retransmission 0 = Not Installed 1 = Installed*
Communications 0 = No Comms 1 = RS-485 ModBus 2 = Ethernet ModBus TCP
Input Voltage 0 = 100 to 240Vac 1 = 24Vac/DC Data Logger, Real Time Clock and USB
0 = Not Installed 1 = Installed**
USB only with USB Memory Stick 0 = Not Installed 1 = Installed** 2nd Strain Gauge Retransmission Only
0 = Not Installed 1 = Installed*
24 V Transmit Power Supply 0 = Not Installed 1 = Installed – Use with relay options 0, 2 or 4 only
* ‘2nd Strain Gauge Input / Setpoint w/ 2nd Retransmission’ and ‘2nd strain gauge Retransmission only’ cannot be ordered simultaneously
** ‘USB only with USB Memory Stick’ and ‘Data Logger, Real Time Clock, and USB’ cannot be ordered simultaneously