Enerpac GBJ010A Bottle Jack

GBJ-Series, Industrial Steel Bottle Jacks ▼ Shown: GBJ010A, GBJ030A, GBJ003A
Screw Extension Feature Heat treated, adjustable extension screw with cleated saddle on
selected GBJ models helps adjusting and prevents slipping.
Cylinder-Pump Sets As an alternative to bottle jacks where the operator is required
to stand remote from the jacking point, see our range of cylinder-pump sets.
• • • • • • • •
Lower handle effort reduces operator fatigue Fully serviceable High-strength beam and pump linkage for long life
Pumping handle included on all models Safety relief valve to prevent overload
Automatic by-pass port to prevent over-extension Wiper seal for extended life
Thick base material with large area for increased strength and stability during lifting
• Positioning handle on 22 tons through 55 tons models.
Jack Capacity
Stroke
tons
(in)
2 3 5 8 11 11 17 22 22 33 55 110
18.11 4.13 5.91 5.91 5.91 2.44 5.91 5.91 4.13 5.91 5.51 5.91
Model Number
GBJ002LA GBJ003A GBJ005A GBJ008A GBJ010A GBJ010SA GBJ015A GBJ020A GBJ020SA
GBJ030A GBJ050A GBJ100
All GBJ Jacks meet or exceed: ANSI, PALD, CE.
68
6
Page:
Lifting Wedge and Machine Lifts Ideal to lift the load the first few inches. The LW16 Lifting Wedge
requires a very small access gap of only 0.39 inch.
Page:
Screw Extension
Min.
Height
Max.
Height
Plunger diameter
Saddle Diameter
(in)
(in)
(in)
(in)
2.56 2.95 2.95 2.95 1.18 2.95 2.95 2.17 2.95 -
22.44 6.61 8.35 8.62 8.62 5.16 8.98 9.21 7.48 9.53 10.24 11.81
40.55 13.31 17.20 17.48 17.48 8.78 17.83 18.07 13.78 18.39 15.75 17.72
1.14 0.94 1.14 1.46 1.46 1.46 1.75 2.00 2.00 2.27 3.15 4.33
182
(in)
Bottom Dimensions WxL (in)
(lbs)
0.93 1.12 1.50 1.50 1.50 1.77 2.40 2.40 2.72 3.15 3.70
5.00 x 5.00 2.95 x 4.57 2.95 x 4.92 3.54 x 5.67 3.54 x 5.67 3.54 x 5.67 4.41 x 6.42
4.72 x 6.77 4.72 x 6.77 5.67 x 7.72 6.50 x 8.43 11.65 x 13.11
22.1 8.1 9.9 13.6 14.1 11 19.4 23.3 20.9 34.2 59.4 191.8