Ricambi industriali e soluzioni ingegneristiche dal 2001.
Grundfos SP 46-17 Pump
Schede Tecniche / Documentazione Prodotto
| Marca |  |
| Categoria | Pompa |
| Nome prodotto | Grundfos SP 46-17 Pump |
| Codice prodotto | SP 46-17 |
Contattaci! 24 ore lavorative (esclusi weekend e festivi) per confermare disponibilità e tempi di consegna.
Descrizione del prodotto
I prodotti Grundfos, incluso Grundfos SP 46-17 Pump, vengono approvvigionati tramite canali di importazione parallela e consegnati ai nostri clienti in United States con rapidità e affidabilità. Imtek Engineering offre componenti originali Grundfos a prezzi competitivi. Anche se Grundfos SP 46-17 Pump non è elencato sul nostro sito, è possibile richiedere un preventivo in qualsiasi momento — il nostro team risponderà tempestivamente.
United Statesduring transportation.
If the pump is unpacked, store it horizontally, or vertically to prevent misalignment. Make sure that
the pump cannot roll or fall over. Support it if necessary.
During storage, the pump can be supported as indicated in the figure below.
4.2 Handling
WARNING Crushing of feet Death or serious personal injury ‐ Stack the pumps with the biggest at
the bottom, and do not stack above 1 m.
‐
‐
Use lifting equipment which is approved for the weight of the product.
Wear personal protective equipment.
WARNING Crushing of hands Death or serious personal injury ‐ Stack the pumps with the biggest at
the bottom, and do not stack above 1 m.
‐
Use lifting equipment which is approved for the weight of the product.
Store the pump in the package until it is ready for installation.
Handle the pump with care.
Fix the extra nameplate supplied with the pump at the installation site.
Do not expose the pump to mechanical impact, vibrations etc.
4.3 Storage 4.3.1 Storage temperature Pump: -4 to +140 °F (-20 to +60 °C).
Motor: -4 to +158 °F (-20 to +70 °C).
Store the motors in a closed, dry and well ventilated room.
If MMS motors are stored, the shaft must be turned by hand at least once a
month. If a motor has been stored for more than a year before installation,
the rotating parts of the motor must be dismantled and checked before use.
Do not expose the pump to direct sunlight.
8
TM001349
English (US)
4. Delivery, handling and storage
Pump position during storage 4.3.2 Frost protection If the pump has to be stored after use, it must be
stored on a frost-free location, or the motor liquid must be frost-proof.
5. Operating conditions Up to 1400 gpm
Flow rate, Q:
(318 m3/h)
Head, H:
Up to 2657 ft (810 m)
Liquid temperature:
32-140 °F (0-60 °C)
Maximum submersible depth:
MS 402
492 ft (150 m) (213 psi)
MS 4000
1969 ft (600 m) (852 psi)
MS 6000
1969 ft (600 m) (852 psi)
All MMS
1969 ft (600 m) (852 psi)
Domande Frequenti
Domande frequenti su Grundfos SP 46-17 Pump di Grundfos. Imtek Engineering è pronta ad assisterla nell'approvvigionamento di Grundfos SP 46-17 Pump da Grundfos in United States.
Imtek Engineering si approvvigiona di prodotti originali Grundfos tramite canali di fornitura affidabili e li offre ai clienti in United States a prezzi competitivi.
