Honsberg HD1KO-025GK080 Flow Switch

Dimensions and weights
Brass
Stainless steel
Ordering code
G
Types
AF
X
G 1/4 G 3/8 G 1/2 G 3/4 G1 G 1/4 G 3/8 G 1/2 G 3/4 G1
HD1K-008GM HD1K-010GM HD1K-015GM HD1K-020GM HD1K-025GM HD1K-008GK HD1K-010GK
HD1K-015GK HD1K-020GK HD1K-025GK
40
15
Weight kg 1.4 1.3
18 41
15
18
1.2 1.3
1.2 1.1
additional weights for options additional switching head 0.10 kg Display O
Display O1 / Z1 0.05 kg
1.
HD1K -
2.
3.
4.
5.
6.
G
1. Display options no mechanical display O1- with measurement display at side O1
with measurement display at side O OZ1- with frontal measurement display Z1
2. Nominal width 008 DN 8 - G 1/4 • 010 DN 10 - G 3/8 015 DN 15 - G 1/2 020 DN 20 - G 3/4
025 DN 25 - G 1
3. Process connection G female thread
4. Connection material M brass K stainless steel Switching range H2O 5.
for horizontal inwards flow 001 0.1 - 1 l/min • 005 0.5 - 5 l/min • 010 1.0 - 10 l/min
• 020 2.0 - 20 l/min • 030 3.0 - 30 l/min • 040 4.0 - 40 l/min • 060 6.0 - 60 l/min
080 20.0 - 80 l/min
6. Special switching head
0.10 kg A
Handling and operation
HD1KO1-
•
HD1KO-
• • • HD1KZ1-
• • • • • • •
• • • • • •
• Temperature display •
Switching head ATEX A-H1.1 / A-H2.1 Please order the switching head for -use in addition.
Note
Options
● Include straight calming section of 5 x DN in inlet and outlet ● If the media are dirty, install a filter
(use magnetic filter for ferritic components).
● It must be ensured that the values given for voltage, current, and power are not exceeded.
● When switch on, a load must be connected in series.
● The electrical details apply to ohmic loads. Capacitive, inductive and lamp loads must be operated using a protective
circuit.
● Signal lamp red or red / green in the plug DIN 43650-A ● Switch contact SPST change over 250 VAC, 0,35 A, 30 VA increased hysteresis depending on switching value. Only
available with fixed switch point.
● Switch contact SPST N.O. 250 V DC 1.5 A 50 W / 265 V AC 1.1 A 50 VA ● Temperature resistant up to 150 °C
● Reinforced piston (only if made of brass) ● Additional switching head ● Connection for round plug connector M12x1
● High pressure model PN 500 (only if made of brass) ● Adjustment scale with markings in l/min
● Temperature monitoring ● Damping for gas monitoring (only for standard version)
● Switching values for oil or gas ● Special values ● Temperature display 0...120 °C
● Switching head made of metal
Adjustment If it is necessary to set the switching value, the switching head can be
adjusted by adjustment of a pinion.
When the switching value is reached, the switching unit is fixed in place by a
fastening bolt (AF 8).
Ordering information ● Specify direction of flow, medium, and switching range.
● For viscous media specify viscosity, temperature, and medium (e.g. ISO VG 68) (enquire about switching range).
● For gases, state pressure (relative or absolute), temperature and medium (e.g. air) (request switching range).
2
dsh_fam_hd1k_en_vs02