Ricambi industriali e soluzioni ingegneristiche dal 2001.
Janitza 96 RM-EL Power Analyzer Or Technically Equivalent
Schede Tecniche / Documentazione Prodotto
| Marca | |
| Categoria | Altri |
| Nome prodotto | Janitza 96 RM-EL Power Analyzer Or Technically Equivalent |
| Codice prodotto | 96 RM-EL |
Contattaci! 24 ore lavorative (esclusi weekend e festivi) per confermare disponibilità e tempi di consegna.
Descrizione del prodotto
I prodotti Janitza, incluso Janitza 96 RM-EL Power Analyzer Or Technically Equivalent, vengono approvvigionati tramite canali di importazione parallela e consegnati ai nostri clienti in United States con rapidità e affidabilità. Imtek Engineering offre componenti originali Janitza a prezzi competitivi. Anche se Janitza 96 RM-EL Power Analyzer Or Technically Equivalent non è elencato sul nostro sito, è possibile richiedere un preventivo in qualsiasi momento — il nostro team risponderà tempestivamente.
United States265 g
Net weight (with attached connectors)
300 g
Device dimensions
approx. l = 42 mm, b = 97 mm, h = 100 mm
Service life of the backlight
40,000 hours (50% of initial brightness)
Transport and storage The following information applies for devices that are transported or stored in their original packaging.
Free fall 1m Temperature
K55 (-25 °C to +70 °C)
Relative humidity
0 to 90% RH
Ambient conditions during operation The UMG 96RM is intended for use in weather-protected, fixed locations.
Protection class II according to IEC 60563 (VDE 0106, part 1).
Rated temperature range K55 (-10 °C .. +55 °C) Relative humidity
0 to 75 % RH
Operational altitude
0 .. 2000 m above sea level
Degree of pollution
2
Installation position
any
Ventilation
Forced ventilation is not required.
Foreign body and water protection
- Front
- Back
- Front with seal
IP40 according to EN60529 IP20 according to EN60529 IP54 according to EN60529
Power supply voltage Option 230V
Option 24V
Nominal range Power consumption
90V - 277V (50/60Hz) or DC 90V - 250V; 300V CATIII max. 7.5VA / 4W
Nominal range
24V - 90V AC / DC; 150V CATIII
Power consumption
max. 3.5VA / 2W
Operating range
+-10% of nominal range
Internal fuse, not replaceable
Typ T1A / 250V/277V according IEC 60127
Recommended overcurrent protection device for line protection (certified under UL)
Option 230V:
Option 24V:
(Char. B)
6 - 16A 1 - 6A
Recommendation for a maximum number of devices on a circuit breaker:
Option 230V : Circuit breaker B6A: max. 4 devices / Circuit breaker B16A: max. 11 devices
Option 24V : Circuit breaker B6A: max. 3 devices / Circuit breaker B16A: max. 9 devices
Connection capacity of the terminals (power supply) Connectable conductor. Only one conductor may be connected per contact point!
Single-wire, multi-wire, finely stranded conductor 0.2 - 2.5mm2, AWG 26 - 12
Pin terminals, ferrules
0.2 - 2.5mm2
Tightening torque
0.4 - 0.5Nm
Stripping length
7mm
02/2019 • Data sheet UMG 96RM – 3
UMG 96RM
TECHNICAL DATA
Domande Frequenti
Domande frequenti su Janitza 96 RM-EL Power Analyzer Or Technically Equivalent di Janitza. Imtek Engineering è pronta ad assisterla nell'approvvigionamento di Janitza 96 RM-EL Power Analyzer Or Technically Equivalent da Janitza in United States.
Imtek Engineering si approvvigiona di prodotti originali Janitza tramite canali di fornitura affidabili e li offre ai clienti in United States a prezzi competitivi.
