Olaer 10383101125 EBV 0.5-50/00 Bladder

OLAER | EBV
9
Fittings Accumulator model
FLANGES Connection of accumulator ø F gas cyl.
EBV 0,5 to 5 L
2”
Connection reducing bush ø I gas cyl.
J/Flats
1” Blind
EBV 10 to 50 L
3½”
65
2“ Blind
EBV 100 to 200 L
M 205 x 3
2” Blind
40 bar Other capacities
112
K
O-Ring
13
54 x 3
20
96 x 4 196.21 x
20
5.33
Capacity of Accumulator
K
EBV 0.5 to 5 L
13
EBV 10 to 50 L
20
2 opposite
EBV 100 to 200 L 40 Bar
holes ø 8.5
Other capacities
20 Consult Olaer
Consult Olaer
Shape A - Seal in angle
Threaded
Blind
Accessories Charging sets are used to inflate, check, top-up or vent the nitrogen gas precharge in all accumulators. They are to
be screwed to the gas valve or bladder stem and connected to the gas regulator that fits the Nitrogen bottles. They
are supplied in a plastic case.
VG3 Model The standard set is delivered in a storage case containing the following:
• VG3 tester and pressurizer • Pressure gauge kit from 0 to 60 bar • 3 connection adapters for inflation
valves (7/8”-14 UNF/5/8”-18 UNF/8 V1) • High pressure hose, 2 m long, for connecting to
a nitrogen source. The flexible tube is fitted with a female connector at both ends (60° BSP 1/4’’
connector for connection to the pressurizing port and connector dia 21,7 x 1,814 SI) with gasket
for connection to a pressure source (commercial nitrogen cylinder, portable nitrogen station,
superpressurizer, etc.).
Note:
The following options are available on request: Pressure gauge kits with different scale divisions. Scale divisions
0-6, 0-10, 0-60 High pressure hose TS2 for maximum pressure 400 Bar.
Ordering code - Example: VG3 25 1 TS2 1 250 = Gauges, possible choice between pressure ranges
6/10/25/60 TS2 = Flexible hose for maximum working pressure 60 Bar
The Professional Choice
VGU Model
• • • •
The standard set is delivered in a storage case containing the following:
• VGU universal tester and pressurizer (end M28x1.50)
• Pressure gauge kit from 0 to 25 bar
• Connection adapters for inflation valves (7/8’’ – 5/8’’ – 8V1 - M28x1.50)
High pressure hose, 2.5 m long, for connecting to a nitrogen source Hexagon socket screw key 6mm
Seal Kit Operating instruction in French, English, German
Note:
The following options are available on request: Pressure gauge kits with different scale divisions: 63mm with
glycerol filled back end G1/4’’ cyl. equiped with coupling for Minimess connection. Scale divisions 0-10, 0-60
with accuracy class 1.6%.
High pressure hose of different length with adapters for nitrogen bottles from various countries (specify country),
at each end with a female swivel coupling G1/4’’ for connecting to the inflation port.
Ordering code - Example: VGU/F 0/20 7 TS2 3 25/60 = Gauges, possible choice between pressure ranges
6/10/25/60