Ricambi industriali e soluzioni ingegneristiche dal 2001.
SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder
Schede Tecniche / Documentazione Prodotto
- Al momento non è disponibile documentazione tecnica per questo prodotto. Contattaci per ulteriori informazioni.
| Marca |  |
| Categoria | Encoder |
| Nome prodotto | SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder |
| Codice prodotto | DFS60B-S1PL10000 |
Contattaci! 24 ore lavorative (esclusi weekend e festivi) per confermare disponibilità e tempi di consegna.
Descrizione del prodotto
I prodotti SICK, incluso SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder, vengono approvvigionati tramite canali di importazione parallela e consegnati ai nostri clienti in United States con rapidità e affidabilità. Imtek Engineering offre componenti originali SICK a prezzi competitivi. Anche se SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder non è elencato sul nostro sito, è possibile richiedere un preventivo in qualsiasi momento — il nostro team risponderà tempestivamente.
United States- PERFORMANCE
Measuring step 90° electronically/ppr Measuring step deviation at non binary number of lines ± 0.01° Error limits ± 0.05° Initialization time 32 ms 1)
30 ms
- 1) With mechanical zero pulse width.
- INTERFACES
Communication interface Incremental Communication Interface detail TTL / HTL Factory setting Factory setting: output level TTL Number of signal channels 6-channel Programmable/configurable ✔
- ELECTRICAL DATA
Connection type Cable, 8-wire, universal, 3 m Operating current 40 mA Power consumption ≤ 0.7 W (without load) Supply voltage 4.5 ... 32 V Load current ≤ 30 mA Output frequency ≤ 600 kHz Reference signal, number 1 Reference signal, position 90°, electric, logically gated with A and B Reverse polarity protection ✔ Short-circuit protection of the outputs ✔ 1) MTTFd: mean time to dangerous failure 300 years (EN ISO 13849-1) 2) - 1) Programming TTL with ≥ 5.5 V: short-circuit opposite to another channel or GND permissable for maximum 30 s.
- 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.
- MECHANICAL DATA
Mechanical design Solid shaft, Servo flange Shaft diameter 6 mm Shaft length 10 mm Flange type / stator coupling Servo flange Weight 0.3 kg Flange material Aluminum Housing material Aluminum die cast Start up torque 0.5 Ncm (+20 °C) Operating torque 0.3 Ncm (+20 °C) Permissible shaft loading radial/axial 80 N (radial)
40 N (axial)
Operating speed ≤ 9,000 min⁻¹ 1) Moment of inertia of the rotor 6.2 gcm² Bearing lifetime 3.6 x 10^10 revolutions Angular acceleration ≤ 500,000 rad/s² - 1) Allow for self-heating of 3.3 K per 1,000 rpm when designing the operating temperature range.
- AMBIENT DATA
EMC According to EN 61000-6-2 and EN 61000-6-3 Enclosure rating IP67, housing side, cable connection (according to IEC 60529)
IP65, shaft side (according to IEC 60529)
Permissible relative humidity 90 % (condensation of the optical scanning not permitted) Operating temperature range –40 °C ... +100 °C 1)
–30 °C ... +100 °C 2)
Storage temperature range –40 °C ... +100 °C, without package Resistance to shocks 70 g, 6 ms (according to EN 60068-2-27) Resistance to vibration 30 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) - 1) Stationary position of the cable.
- 2) Flexible position of the cable.
- CLASSIFICATIONS
ECl@ss 5.0 27270501 ECl@ss 5.1.4 27270501 ECl@ss 6.0 27270590 ECl@ss 6.2 27270590 ECl@ss 7.0 27270501 ECl@ss 8.0 27270501 ECl@ss 8.1 27270501 ECl@ss 9.0 27270501 ECl@ss 10.0 27270501 ECl@ss 11.0 27270501 ETIM 5.0 EC001486 ETIM 6.0 EC001486 UNSPSC 16.0901 41112113
Domande Frequenti
Domande frequenti su SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder di SICK. Imtek Engineering è pronta ad assisterla nell'approvvigionamento di SICK 1036758 type: DFS60B-S1PL10000 Incremental encoder da SICK in United States.
Imtek Engineering si approvvigiona di prodotti originali SICK tramite canali di fornitura affidabili e li offre ai clienti in United States a prezzi competitivi.
