Viatran 5705BPSX1052 Sensor

oil, gas and petrochemical
model
509
pt 332
570 | 770 | 870
970
571
572
industrial test and control
industrial test and control
948
548 | 748 | 848
spx
ffx
pt 311
ida series
243 | 343
270
247 | 347
245 | 345
100 series
249 | 349
water and wastewater
pt 139
148 | 248 | 348
800 series
274 | 374
idp10
517 | ww517
360 | 960
sanitary, food and medical
363
364 | 964
350 | 351
pt 375 APPROVALS
APPROVALS
APPROVALS
GOST. NEPSI
Drill tools Oil rigs Oil platforms Downhole unit
APPLICATIONS
Oil well fracturing and cementing Acid treatment Gravel packaging Well head
FEATURES BENEFITS
No mounting stress Subminiature design Shock and vibration Temperature resistant
compensated
NACE compliant Lightweight Non-clogging port Inconel wetted parts
STANDARD PSI RANGES
0-5,000 thru 0-20,000 psis
0-5,000 thru 0-25,000 psis
Rig safety systems Well head Oil pumping Natural gas pipelines Hazardous
locations
Polymer production Oil rigs Shipboard/Marine Wastewater Hazardous locations
Rig safety systems Chemical processing Shipboard/Marine Gas compressors Hazardous
locations
Sour gas wells Secondary oil recovery Oil pumping Hazardous locations
Fuel tank level Chemical tank level Gas compressors Chemical processing Hazardous
locations
Fuel tank level Chemical tank level Gas compressors Chemical processing Hazardous
locations
Chemical processing Oil and gas Polymer plants Hazardous locations
Chemical processing Oil and gas Polymer plants Hazardous locations
Slurries Chemical processing Pulp and paper Polymer plants
General purpose Test stands Dynos High volume usage
General industrial Hydraulics Pneumatics Compressors Off-road vehicle Water treatment
Hostile environments Test stands Dynos Control systems Die casting
Test stands Metrology Laboratory/Research Automotive test systems Semiconductors
Caliper testing Dynos
APPLICATIONS
Hydraulics Pneumatics Test systems Pumps/Compressors Mining Off-road vehicles
Water treatment plants
Hydraulic and pneumatic systems Injection molding Ore trucks Cranes
Test stands Jet Engine Brake Hydraulic Pumps/Compressors
Test stands Dynamometers Road test systems Brake test stands
Die casting Stamping presses Rolling mills Hydraulic systems Test stands
Automotive test stands Aerospace Military General industrial Hydraulic systems
Leak test Engine test stands Autoclaves Wind tunnels
Wastewater Natural gas processing Food processing Shipboard/Marine
Reservoirs/Dams Ground water wells
EPA plant studies Chemical processing Shipboard/Marine
Dairy/Food/ Beverage Pharmaceutical/ Biotechnology Balance tanks Silo tanks
Sanitary tank level Beverage processing Food/Dairy processing Pharmaceutical
processing
Dairy Food/Beverage Pharmaceutical/ Biotechnology Balance/Silo tanks
Pharmaceutical Food/Beverage Dairy Paint Confections
Pharmaceutical Medical Food Dairy Industrial
APPLICATIONS
Hermetically sealed enclosure 316L SS housing Less than 5” height 1.5” diameter
< 1.3 mA current consumption available
NACE complaint materials available
HART features:
- 5:1 rangeability
- remote config.
- multi-drop network 316 SS housing 1.5” diameter Submersible
NACE compliant materials available
Magnetically coupled external controls 5:1 ranging Hermetically sealed 316 SS housing
1.5” diameter < 7” height
NACE compliant materials available
40K psi secondary containment vessel Hermetically sealed NACE/API 6A compliant
Inconel 718 Magnetically coupled external controls
All welded construction Optional external zero and span adjusts 316L SS wetted
parts Ranges down to 20” WC Hazardous locations
HART features:
- 10:1 rangeability
- remote config.
- multi-drop network All 316L SS construction 1.5” diameter Submersible
HART features:
- 10:1 rangeability
- remote config.
- multi-drop network NAMUR Output sent directly to DCS or PLC Improved frequency
response
Foundation FieldBus Easy hand-held configuration Output sent directly to DCS or PLC
Improved frequency response
Flush diaphragm Zero volume pressure port Easy set-up Internal calibration
shunt
CANopen available Easy set-up via directional BUS communications
SST construction Flush sensor model High accuracy
Low cost Small size Environmentally sealed High cycle life (1,000,000 cycles)
Shock resistant Stainless steel construction
Stainless steel construction Spike resistant High accuracy High cycle life
Precise pressure measurement DeviceNET available All pressure ranges
≤ ± 0.05% linearity (available) Digitally compensated Small size Fast response
RFI/EMI protected External adjustments Stainless steel construction Multiple connector,
port, perf. options
FEATURES BENEFITS
DIN connector standard Spike resistant High cycle life Stainless steel construction
External zero adjust
Long life, low cost Spike and corrosion resistant Quick calibration Withstands severe
environments Temp compensated Surface mount technology
Top mounted, sealed external adjustments Stainless steel construction High accuracy
Internal calibration circuit ≤ ± 0.05% linearity available
< 2.5” H, 1”D Temps to 285°F Pressure/vacuum service All welded SST Western regional
wiring code option
3X overpressure Stainless steel construction < 1 millisecond response time
Multiple connector, port, performance options available
All welded SST ≤ ± 0.5%/100°F temperature performance Internal calibration
circuit Easy set-up Field proven technology External zero and span adjustments
Fast response 1,000 psid overpressure 3,000 psid optional Low range wet/wet DP
mV/V output available Hastelloy wetted parts available
HART DP 30:1 ranging Push button configuration and calibration Local digital
indication Exotic wetted materials available
0.87” diameter 316L SS construction O-ring free design All welded transmitter
Integral atmospheric reference tube
Less than 1 minute CIP/SIP recovery Flush Hastelloy diaphragm 316L SS, NEMA 4X
housing 3:1 ranging Zero and Span adjust Optional display
Flush Hastelloy diaphragm Unique Gortex breathing system Less than 1 minute
thermal recovery time All welded SS construction Zero and span adjusts
Standard Hastelloy C-276 diaphragm Accessible electrical conduit connection design
Optional LED display Zero and Span adjusts Eliminates daily drift issue
316L SS construction No oil fill Flush sensor CIP/SIP design Exotic material
wetted parts available Magnetically coupled external controls (351) 5:1 ranging (351)
Easy set-up Metal to metal seal Flush diaphragm Zero volume pressure port
FEATURES BENEFITS
0-100 thru 0-100,000 psis/a
0-100 thru 0-100,000 psis/a
0-100 thru 0-100,000 psis/a
0-100 thru 0-20,000 psis/a
0-3 thru 0-5000 psig/s 0-3 thru 0-5000 psig/s 0-5 thru 0-15 thru 0-500 psia 0-15 thru 0-500 psia 0-72,500 psis/g/a
0-15 psiv 0-15 psiv
0-5 thru 0-72,500 psis/g/a
0-15 thru 0-10,000 psig
0-300 thru 0-15,000 psig
0-100 thru 0-15,000 psig
0-15 thru 0-10,000 psig
0-2 thru 0-100,000 psig/a 0-15 psiv
STANDARD PSI RANGES
0-5 thru 0-15,000 psig 0-10 thru 0-100 psia 0-15 psiv
0-15 thru 0-10,000 psig
0-2 thru 0-100K psig/a 0-15 psiv
0-15 thru 0-10,000 psig
0-3 thru 0-15,000 psig 0-200 psia 0-15 psiv
0-5 thru 0-30,000 psig/s/a 0-15 psiv
0-0.5” WCD thru 0-3.000 psid Line Pressure:
1,000 psi
0-5” WCD thru 0-300 psid
0-2 thru 0-500 psig (40” thru 1155”WC)
0-30” thru 0-750” WCG
0-30” WCG thru 0-500 psig 0-15 thru 0-500 psia 0-15 psiv
0-3 thru 0-500 psig 0-15 thru 0-500 psia 0-15 psiv
350: 0-100 thru 0-1000 psis/a 351: 0-100, 400, 1000 psis/a
0-1,000 thru 0-30,000 psig
STANDARD PSI RANGES
Available in: MPa, kgf/cm2, et al
Available in: MPa, kgf/cm2, et al
Available in: MPa, kgf/cm2, et al
STANDARD BAR RANGES
0-350 thru 0-1,400 bars
0-350 thru 0-1,750 bars
0-7 thru 0-7,000 bars/a
0-7 thru 0-7,000 bars/a
0-7 thru 0-7,000 bars/a
0-7 thru 0-1,400 bars/a
0-0.2 thru 0-350 barg/s 0-1 thru 0-35 bara 0-1 barv
0-0.2 thru 0-350 barg/s 0-1 thru 0 35 bara 0-1 barv
0-0.35 thru 0-5000 barg/s/a
0-0.35 thru 0-5000 barg/s/a
0-1 thru 0-700 barg
0-20 thru 0-1,000 barg
0-7 thru 0-1,400 barg
0-1 thru 0-700 barg
0-0.14 thru 0-7,000 barg/s/a 0-1 barv
STANDARD BAR RANGES
0-0.35 thru 0-1,000 barg 0-0.7 thru 0 - 7 bara 0-1 barv
0-1 thru 0-700 barg
0-0.14 thru 0-7,000 barg/s/a 0-1 barv
0-1 thru 0-700 barg
0-0.2 thru 0-1,000 barg 0-14 bara 0-1 barv
0-0.35 thru 0-2,000 barg/s/a 0-1 barv
0-5” WCD thru 0-5” WCD thru 0-7 bard 0-20 bard Line Pressure: 70 bar
0-0.14 thru 0-35 barg
0-30” WCG thru 0-2 barg
0-30” WCG thru 0-35 barg 0-1 thru 0 - 35 bara 0-1 barv
0-0.2 thru 0-35 barg 0-1 thru 35 bara 0-1 barv
350: 0-7 thru 0-70 barg/s/a 351: 0-7, 28, 70 barg/s/a
0-70 thru 0-2,000 barg
STANDARD BAR RANGES
FULL SCALE OUTPUT (FSO)
4-20 mA
1.97 mV/V
4-20 mA 0-5 (0-10) Vdc 2 mV/V
4-20 mA HART Digital signal
4-20 mA
4-20 mA
4-20 mA 0-5 (0-10) Vdc 5-10 mV/V
4-20 mA HART Digital signal
4-20 mA HART Digital signal
FOUNDATION FieldBus H1
3 mV/V
3 mV/V 0-5 (1-6) Vdc 0-10 (1-11) Vdc 4-20 mA CANopen
0-5 (0-10) Vdc 4-20 mA
3 mV/V 0-5 (1-6) Vdc 0-10 (1-11) Vdc 4-20 mA DeviceNet
0-5 (0-10) Vdc 4-20 mA
FULL SCALE OUTPUT (FSO)
0-5 (0-10) Vdc 4-20 mA
3 mV/V 0-5 (1-6) Vdc 0-10 (1-11) Vdc 4-20 mA
0-5 (0-10) Vdc 4-20 mA
3 mV/V
2.5-10 mV/V 0-5 (0-10) Vdc 4-20 mA
3 mV/V 0-5 Vdc 0-10 Vdc
0-5 (0-10) Vdc 4-20 mA
1-5 Vdc 4-20 mA 4-20 mA HART Digital Signal
4-20 mA
4-20 mA 4-20 mA HART Digital Signal
4-20 mA
4-20 mA 4-20 mA HART Digital Signal
4-20 mA
3 mV/V 4-20 mA
FULL SCALE OUTPUT (FSO)
NOMINAL INPUT VOLTAGES
9-28 Vdc
5 Vdc
11.5-30 Vdc 9-30 Vdc 10-15 Vdc
11.5-30 Vdc
11.5-30 Vdc
11.5-30 Vdc
11.5-30 Vdc 9-30 Vdc 10-15 Vdc
11.5-30 Vdc
16-30 Vdc
9-24 Vdc
10 Vdc
10 Vdc 10-32 Vdc 15-32 Vdc 10-36 Vdc 18-32 Vdc
10-30 Vdc
10 Vdc 10-36 Vdc 14-36 Vdc 12-36 Vdc 11-25 Vdc
9-30 (13-30) Vdc 9-30 Vdc
NOMINAL INPUT VOLTAGES
10-40 (15-40) Vdc 10-40 Vdc
10 Vdc 11-32 Vdc 16-32 Vdc 14-36 Vdc
9-40 (12-28) Vdc 9-40 Vdc
10 Vdc
10-15 Vdc 9-30 (12-30) Vdc 9-30 Vdc
10 Vdc 24-32 Vdc 24-32 Vdc
10-42 (15-45) Vdc 10-42 Vdc
9-15.5 Vdc 11.5-42 Vdc 17-42 Vdc
9-30 Vdc
9-30 Vdc (14-30 with display) 11.5-30 Vdc
9-30 Vdc
9-30 Vdc (14-30 with display) 11.5-30 Vdc
350: 10-36 Vdc 351: 9.5-40 Vdc
10 Vdc 16-30 Vdc
NOMINAL INPUT VOLTAGES
ACCURACY [COMBINED ERROR]
≤ ± 0.25%
≤ ± 0.25%
≤ ± 0.10% (≤ 20K psi) ≤ ± 0.15% ≤ ± 0.15% ≤ ± 0.25% ≤ ± 0.25% (≥ 20K psi) ≤ ± 0.25% (> 20K psi) ≤ ± 0.25% (≥ 20K psi) (150-20K psi)
≤ ± 0.30% (100 psi) ≤ ± 0.50% (100 psi) ≤ ± 0.30% (100 psi)
≤ ± 0.15%(> 200psi) ≤ ± 0.10% ≤ ± 0.25% (≤ 200psi)
2281: ≤ ± 0.25% 2280: ≤ ± 0.5%
2281: ≤ ± 0.25% 2280: ≤ ± 0.5%
≤ ± 0.5%
≤ ± 0.25%
≤ ± 0.65%
≤ ± 0.25%
≤ ± 0.05% (≤ 5Kpsi) ≤ ± 0.15% (> 5Kpsi)
ACCURACY [COMBINED ERROR]
≤ ± 0.60%
≤ ± 0.50%
≤ ± 0.10% (≤ 5K psi) ≤ ± 0.50% ≤ ± 0.15% (> 5K psi)
≤ ± 0.15% (> 200 psi) 8X2: ≤ ± 0.15% ≤ ± 0.25% (≤ 200 psi) 8X1: ≤ ± 0.25%
8X0: ≤ ± 0.50%
≤ ± 0.20%
≤ ± 0.20% maximum
≤ ± 0.10% (≤ ± 0.25% max)
360: ≤ ± 0.10% 960: ≤ ± 0.15%
≤ ± 0.25%
364: ≤ ± 0.25% 964: ≤ ± 0.25%
≤ ± 0.65%
≤ ± 0.50%
ACCURACY [COMBINED ERROR]
STANDARD PRESSURE CONNECTION
WECO 1502 Union
WECO 2002 Union optional
7/16-20UNF-2A
NPT Male
1/4” NPT Female ≤ 15K psi High pressure tube ≥ 20K psi
1/4” NPT Female ≤ 15K psi High pressure tube ≥ 20K psi
1/4” NPT Female ≤ 15K psi High pressure tube ≥ 20K psi
1/4” NPT Female ≤ 10K psi Autoclave (AE) F250-C ≥ 15K psi
1/4” NPT Female
1/4” NPT Female
Application specific
Application specific
3/4”-16 UNF-3A
Int. ISO 2281/1-G1/4 1/4” NPT Female Ext. DIN 3852-AG1/4A Flush M18x1.5
1/4” NPT Male
1/4” NPT Female
STANDARD PRESSURE CONNECTION
1/4” NPT Female
1/8” NPT Female
1/4” NPT Female 0-15K psi High pressure Tube 20K-100K psi
1/4” NPT Female
1/4” NPT Female
1/4” NPT Female
Application specific (Remote seals shown)
5/8” - 18 UNF Female
21 adapter types available
1-1/2” or 2” Tri-Clamp
1-1/2” or 2” Tri-Clamp
1”, 1-1/2”, 2”, 2-1/2” Tri-Clamp
3/4” – 16 UNF – 2B
STANDARD PRESSURE CONNECTION
STANDARD WETTED PARTS
Inconel X750, Inconel 718
Inconel 718
15 –5 PH SS ≤15K psi
PH 13-8 Mo SS >20K psi
15 –5 PH SS ≤15K psi
PH 13-8 Mo SS >20K psi
15 –5 PH SS ≤15K psi
PH 13-8 Mo SS >20K psi
Hastelloy C-276 Inconel 718
316L SS
316L SS
15-5 PH SS 17-4 PH SS
15-5 PH SS 17-4 PH SS
17-4 PH SS
15-5 PH SS
15-5 PH SS
15-5 PH SS
316L SST ≤ 5K psi 15-5 ≥ 5K-15K psi
PH 13-8 Mo SS ≥ 20K psi
STANDARD WETTED PARTS
316L SST Buna-N O-ring 0-200 psi
15-5 PH SS
304, 316L SS < 5K psi 15-5 PH SS 15-5 PH SS 5K -15K psi
PH 13-8 Mo SS ≥ 20K psi
304,316 L SST 15-5 PH SS
17-4 PH SS 15-5 PH SS
316 L SS Viton® O-ring
316L SS
316L SS Tefzel or Polyurethane
Hastelloy C-276
Hastelloy C-276
Hastelloy C-276
316L SS
Inconel 718
STANDARD WETTED PARTS
WEIGHT
5 lbs 8 oz (2.5 kg)
1.8 oz (51 g)
24 oz (680 g)
24 oz (680 g)
24 oz (680 g)
4 lbs. 6 oz (1.9 kg)
10 oz (284 g)
24 oz (680 g)
24 oz (680 g)
24 oz (680 g)
5 oz (142 g)
5 oz (142 g)
10 oz (284 g)
8 oz (227 g)
15 oz (425 g)
WEIGHT
10 oz (284 g)
5 oz (142 g)
15 oz (425 g)
10 oz (284 g)
13-17 oz (369-482 g) 56 oz (1.6 kg)
12 lbs (5.4 kg)
10 oz (284 g)
4 lbs. (1.8kg)
16 oz (454 g)
40 oz (1.1 kg)
350: 16 oz (454 g) 351: 30 oz (850 g)
8 oz (227 g)
WEIGHT
1/8” NPT Female
5 oz (142 g)
Challenge Our Engineering, Manufacturing and Sales Team with your pressure or level application. We can solve it!
This information is accurate to the best of the manufacturer’s knowledge, however, we reserve the right to change specifications at any time.