Italvibras MTF 10/5150-S02-ACC 602013 Axial Coupling Flanged Electric Vibrator

Italvibras

Product Code: MTF 10/5150-S02-ACC
Artikelnummer: 602013
Brand: Italvibras

GET OFFER: info@imtek.com.tr

Description for Italvibras MTF 10/5150-S02-ACC 602013 Axial Coupling Flanged Electric Vibrator

Power supply Three phase tension from 220V to 690V at 50Hz or 60Hz; variable frequency from 20Hz to the nameplate frequency, at constant torque, with frequency inverter. Polarities 6 pole standard, 4 & 8 pole on request, depending on frame size. Reference Regulations and Directives Low Voltage Directive 2006/95/CE; EN/IEC 60034-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and on the operating conditions. For detailed information, contact our technical assistance office. Centrifugal force Range extended to 20000 kgf. (197 kN), adjustable varying the position of eccentric weights. Mechanical protection IP66 according to IEC/EN 60529. Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C). Tropicalisation Standard on all vibrators, with “drop by drop” trickle system. Ambient temperature From -20°C to +40°C; higher or lower temperatures are possible on request. Vibrator thermal protection With thermal detectors with thermistors PTC 130°C. Upon request different temperatures thermistors are available and anti-condensation heaters. Fixing of the vibrator Typical fixing of these vibrators on inclined screens is horizontal, with connecting shaft and joints between the two motor-vibrators in order to keep the weights synchronized. The joints and the connecting shaft are not part of the standard supply but on demand only. Lubrication All vibrators are correctly lubricated at the factory and do not require further lubrication at their start-up in normal operating conditions.