Product Name: Italvibras MVB 1510/15-FLC 601225 Electric Vibrator with Central Mounting Flange
Brand: Italvibras
Product Code: MVB 1510/15-FLC
Tags: Italvibras
Artikel: 601225
Electric Vibrator with Central Mounting Flange
Are you interested in the product Italvibras MVB 1510/15-FLC 601225 Electric Vibrator with Central Mounting Flange from manufacturer Italvibras with code MVB 1510/15-FLC? Contact us now and get offer. Imtek Engineering, the fastest and most reliable industrial equipment supplier in the world, will offer you the best offer!
Get Offer With E-Mail: info@im-tek.com
Get a offer for Italvibras MVB 1510/15-FLC 601225 Electric Vibrator with Central Mounting Flange from our live support team now!
Power supply Three-phase voltage from 220V to 690V, 50Hz or 60Hz; suitable for use with an inverter from 20Hz to the base frequency with constant torque load profile. Polarity 4 poles. Conformity with Standards and Regulations Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC 60034-1, EN/IEC 60079-0, EN/IEC 60079-31, UL 1004-1, CSA C22.2 No.100, NEMA MG-1. Functioning Continual service (S1) at maximum declared centrifugal force and electric power. Intermittent services are also possible depending on the type of vibrator and the operating conditions. For detailed information, contact our technical assistance office. Centrifugal force Range extended up to 7000 kgf. (68.7 kN), with centrifugal force adjustable from by varying weights position. Mechanical protection IP 66 according to IEC/EN 60529.Protection against mechanical impacts IK 08 according to IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request. Tropicalization Standard on all vibrators with “drop by drop” trickle system. Ambient temperature From -20°C a +40°C. Versions for higher or lower temperatures are available on request. Vibrator thermal protection Standard PTC rated thermistor heat detectors 130°C from size 80, on request for smaller sizes. Also on request thermistors with different temperatures and anti-condensation heaters. Fixing of the vibrator Typically for vertical mounting, anyway possible to install in all positions and therefore without restriction. Lubrication All vibrators are lubricated in the factory and do not require further lubrication at start-up. Terminal box Large terminal box to facilitate electrical connection. Special shaped terminals allow for the power supply cable to be secured, whilst protecting it from loosening. Electric motor Three-phase asynchronous type. Designed for maximum starting torques and torque curves specific to requirements of vibrating machines.