Power supply Three-phase voltage from 24V to 690V, 50Hz or
60Hz or single-phase 100-130V, 60Hz and 200-240V, 50Hz (single-phase types are
supplied without capacitor); suitable for use with an inverter from 20Hz to the
base frequency with constant torque load profile. Polarity 2, 4, 6 and 8
standard poles, 10 and 12 poles on request. Conformity with Standards and
Regulations Low Voltage Directive 2006/95/EC; ATEX Directive 2014/34/UE; EN/IEC
60034-1, EN/IEC 60079-0, EN/IEC 60079-31, UL 1004-1, CSA C22.2 No.100, NEMA
MG-1. Functioning Continual service (S1) at maximum declared centrifugal force
and electric power. Intermittent services are also possible depending on the
type of vibrator and the operating conditions. For detailed information,
contact our technical assistance office. Centrifugal force Range extended up to
30500 kgf. (300 kN), with centrifugal force adjustable by varying eccentric
weights position. Mechanical protection IP 66 according to IEC/EN 60529.
Protection against mechanical impacts IK 08 according to
IEC/EN 62262. Insulation class Class F (155°C), class H (180°C) on request.
Tropicalization Standard on all vibrators, with vacuum encapsulation up to gr.
AF 33 and 35, with “drop by drop” trickle system for larger sizes. Ambient
temperature From -20°C to +40°C. Versions for higher or lower temperatures are
available on request. Vibrator thermal protection Standard PTC rated thermistor
heat detectors 130°C from size 70, on request for smaller sizes. On request,
thermistors with different temperatures and anti-condensation heaters. Fixing
of the vibrator In all positions and therefore without restriction. Lubrication
All vibrators are lubricated in the factory and do not require further
lubrication at start-up. Terminal box Large terminal box to facilitate
electrical connection. Special shaped terminals allow for the power supply
cable to be secured, whilst protecting it from loosening.
Electric motor Three-phase asynchronous type. Designed
for maximum starting torques and torque curves specific to requirements of
vibrating machines.
