im-tek.com

JVM MS 30-60 Electro Magnetic Vibrator

JVM

Product Code: MS 30-60
Brand: JVM



GET OFFER: info@imtek.com.tr

Description for JVM MS 30-60 Electro Magnetic Vibrator

Discover more about JVM® Electromagnetic VibratorsElectromagnetic Vibrators Series MSTried-and-tested, reliable engineering together with robust, practice-oriented designs provide high operational reliability, even under the most difficult conditions.The electromagnetic vibrators generate linear oscillations and are operated at oscillation frequencies of 50 and 25 Hz or at 60 and 30 Hz. MS drive units are used in a variety of industries for medium duty dosing, draw-off and conveying applications. The drive units are also suitable for clock cycle operation because the maximum oscillation amplitude is reached as soon as it is started and it comes to a stop immediately after being switched off.The oscillation amplitude can be infinitely controlled during the operation of all JVM® electromagnetic vibrators. Therefore the feed rate can be easily adjusted to the current requirements. We have summarized information on the required thyristor controller at Electrical components Adapted model series MS drive units are available in seven sizes, and also in models for higher effective weights at lower oscillation amplitudes (MS 30…80). This broad range enables the optimum drive to be selected for the particular application requirements.The use of high quality components means that JVM® electromagnetic vibrators are maintenance-free and particularly easy to install. Special lifting eyes make transport easy, eliminating the need to remove the hoods.Tried-and-tested, reliable engineering together with robust, practice-oriented designs provide high operational reliability, even under the most difficult conditions in central lines. All MS electromagnetic vibrators are EMV-compatible.In order to allow the oscillation frequency to be altered in retrospect, the drives have been designed in such a way that they are interchangeable within a construction size in the oscillation frequencies.

Recommended Products For JVM


JVM MS 10-50 Electro Magnetic Vibrator
JVM JVC 208-570 Unbalance Motor
JVM JD 50-50 Dosing Drive
JVM JVE 134-90 Unbalance Motor
JVM JV 248 Unbalance Motor
JVM JVE 276-1400 Unbalance Motor
JVM MSA 3-50 Electro Magnetic Vibrator
JVM JD 20G-60 Dosing Drive
JVM JX 134-63 Unbalance Motor
JVM JX 206-620 Unbalance Motor
JVM JVE 132-25 Unbalance Motor
JVM JVE 154-130 Unbalance Motor
JVM MS 7-50 Electro Magnetic Vibrator
JVM JVC 276-979 Unbalance Motor
JVM JDA 30G-50 Dosing Drive
JVM JVC 244-280 Unbalance Motor
JVM JX 244-490 Unbalance Motor
JVM JX 154-90 Unbalance Motor
Emotron VSX48-003-20CEB Drive
NSD VRE-16TS062FAL Single-turn Type ABSOCODER Sensor
Nuovafima MGS30/EXTRA DN125
American Industrial SRCS-2060 Heat Exchanger
Faulhaber 15A 809:1 Planetary Gearhead
Dynisco TPT4634-7.5M-6/18 Pressure Sensors
Tempco MODEL TEC-404 TEMPERATURE CONTROLLER
Winsmith 13MCVD Double Reduction Motorized and Gearmotor Speed Reducer
Ru-Steel RSLI 13 RSLI 6 Bolt Range with Spacer and Internal Hubs
KENDRION Ether Injection Solenoid (EIS)
ACL SRL 117 2/2 Servoassisted NC
Hengstler RI58-O/10000EG.43KB-F0 Encoder
ETP HYDRO-GRIP CI-50/60-75 Sleeve
Mahle Pi 51016-058/PiS 3103 78267775 Duplex Filter
Gefran LT-B-0475-S 0000X000B0N Potentiometer
Greisinger GST3810 Replacement Pins
Gefran LT-B-0130-S L000X000X0N Potentiometer
Pressure Tech XHS310 Analyser & Instrumentation Regulator
SKF W 630/1.5 R-2Z Deep Groove Ball Bearings
KSB ETN 125-100-400 GC CP1CGA5 B Pump
Toni Technik Model 7120 Flow Table
SKF D/W R1-4-2ZS Deep Groove Ball Bearings
Hirschmann 1TX/1FX-SM 943891-001 Ethernet Switch
Grundfos NK 40-315/298 AA1F2AESBAQERW1 Pump