Asco 18900001-D2 Valve

SOLENOID VALVES
3/2 189
2
NC
ISO 15218 (CNOMO, size 30) interface direct operated, pad mounting body subbases for instant fittings or 1/8 thread
Series
3 1 2
NO 3 1
FEATURES
• CNOMO pad-mount version for valve piloting applications
• Compact size and low weight for easy installation on single or joinable subbases
• AC/DC interchangeability of the solenoid operator without any need for disassembly of the valve
• Version with M12 connection with visual indication and peak voltage suppression
conforming to “UL” standards
• Flexible installation on joinable subbases
• Manual operator as standard
• The solenoid valves satisfy all relevant EU directives
GENERAL
Differential pressure Response time
See “SPECIFICATIONS” [1 bar =100 kPa] 5 - 10 ms
fluids () air, inert gas
temperature range (TS) -10°C to +60°C
seal materials ()
NBR (nitrile)
MATERIALS IN CONTACT WITH FLUID
() Ensure that the compatibility of the fluids in contact with the materials is verified
Body PA, glass-filled Core tube Stainless steel Core and plugnut Stainless steel
Internal parts, springs Stainless steel Seals NBR Shading coil Copper
CONSTRUCTION
3
Mounting pad
ISO 15218 (CNOMO 06-05-80 / NF E 49066, size 30)
Coil insulation class Connector Connector specification
Electrical safety Electrical enclosure protection Standard voltages (Other voltages and 60 Hz on request)
F Spade plug (cable Ø 6-8 mm) or M12
DIN 43650, 11 mm, industry standard B or CNOMO E03.62.520.N (M12)
IEC 335 Moulded IP65 (EN 60529)
DC (=): 24V - 48V (M12: 24 V + LED and protection)
AC (~): 24V - 48V - 115V - 230V / 50 Hz
ELECTRICAL CHARACTERISTICS
-
inrush ~ (VA)
(1)
6
power ratings holding ~ (VA) (W)
hot/cold = (W)
operator ambient temperature range (TS) (C°)
3,5
2,5 / 3
-10 to +60
2,5
E
replacement coil ~ 230 V/50 Hz 43004422 -
type (1)
= 24 V DC 43004166 43005523
1 2
01 06
NC function
Refer to the dimensional drawings on the following page.
SPECIFICATIONS
00076GB-2016/R01 Availability, design and specifications are subject to change without notice. All rights reserved.
1 2 (mm)
2 3 (mm)
operating pressure differential (bar)
flow coefficient Kv
orifice size
pipe size
1 2 2 3 (m3/h) (l/min) (m3/h) (l/min)
power coil (W)
max. (PS) air () ~ =
min.
~
=
NC - Normally closed pad mounting (2)
1,2
1,5
1,2
1,5
with maintained manual operator
DIN connector M12 connection ~/= =
0,042
0,7
0,048
0,8
0
10
10
2,5 -
3 3
18900001 -
18900073
0,042
0,7
0,036
0,6
0
6 (5)
6 (5)
2,5 -
3 3
18900010 -
18900075
NO - Normally open pad mounting (2)
catalogue number
SUBBASES pipe size
designation
composition
catalogue number
6/6 polyamide subbases
instant fittings (3)
single subbase (instant fittings OD 4 mm) joinable subbase (instant fittings OD 4 mm)
set of 2 joinable end subbases, right-hand pressure intake, endpieces with instant fittings OD 6 mm
set of 2 joinable end subbases, right-hand and/or left-hand pressure intake,
endpieces with instant fittings OD 6 mm
35300069 35300070 Ø 6mm
35300071 Ø 4mm
Ø 6mm
Ø 6mm
35300072 (4) Ø 4mm
Zamak subbases G 1/8 (3) tapped
35300048
laterally-connected joinable subbase
Port 3: M5.
(3) These subbases can be mounted on omega rail to EN 50022 using 2 clips
(clips sold in packs of 10, catalogue number: 33400036).
(2)
35300047
laterally-connected single subbase
The equipment can be used for two different pressure intakes, supplied with one blanking plug to cover unused port.
(5) 10 bar on request (with 5W/6,9W coil) (4)
All leaflets are available on: www.asco.com V585-1