REVEX 3PH is a fully configurable three phases power controller. If you don’t need features, delete them, so you’ll get an immediate cut on the cost of the unit.

Option

REVEX 3PH is a fully configurable three phases power controller. If you don’t need features, delete them, so you’ll get an immediate cut on the cost of the unit.

• Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
• Load type: Normal Resistance, Infrared Short, Medium and Long Waveform
• Firing mode: Burst Firing, Zero Crossing
• Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
• Communication RS485 with Modbus® protocol std.
• Two Analog input
• Two Digital input
• USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
• With the units already programmed you can simply switch On and Go
• Approvals: Comply with CE+EMC / EAC

Option

• All options are shown below with the relevant model code
• HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit

• Phases:	3
  Type:	Power controller
  Current Range:	30A - 210A
  Max Voltage:	480V, 600V
  Communication:	Modbus
  Approvals:	CE / UKCA / EAC
  Load:	Resistive / Inductive / IRSW / MoSi2 / SiC