Coax VSV-F 150 2/2 Way Externally Controlled Coaxial Valve

2/2 Way Externally Controlled Coaxial Valve

PortsVSV-F flanges ANSI 150 / 600FunctionNCPressure Range0-240 / 0-600 psicv Value316.7 GPMMediagaseous, liquid, highly viscous, gelatinous, pasty, contaminatedFlow DirectionA ? B as markedSwitching Cycles20 1/minSwitching Time [ms]opening 600-3000 closing 600-3000Media Temperature [°F]direct mounted pilot valve 140Ambient Temp. [°F]direct mounted pilot valve 122Weight [kg]VSV-F 87,0Nominal VoltageUN DC 24V, UN AC 230V 50 HzPower ConsumptionDC 4,8 W, AC pick up 11,0 VA holding 8,5 VAProtectionIP 65 (P54) acc. DIN 40 050Energized Duty RatingED 100%

coax® data sheet - coaxial valve type VSV-F 150
09/2022 2/2-way valve
externally controlled
pressure range
PN 0-40 bar
orifice
DN 150 mm
connection
flange
function
valve normally closed symbol NC
details needed for main valve ■ orifice ■ port ■ function NC/NO ■ operating pressure
■ flow rate ■ media ■ media temperature ■ ambient temperature ■ type of actuation
The valves‘ technical design is based on media and application requirements.
This can lead to deviations from the general specifications shown on the data
sheet with regards to the design, sealing materials and characteristics.
4
valve seat
synthetic materials on metal
seal materials
NBR general specifications
options
ports
VSV-F
flanges PN 16 / 40
special flanges
function pressure range
NC 0-16 / 0-40
NO
bar
Kv value vacuum pressure-vacuum
m³/h leak rate P1 P2
back pressure media
P2 > P1
② steel galvanized ⑤ without non-ferr. Metals ⑥ stainless steel
PTFE, FPM, CR, EPDM
274.0 < 10-6 mbar•l•s-1 pressure side max. 40 bar vacuum side leak rate upon request
available (max. 16 bar) gaseous - liquid - highly viscous gelatinous - pasty - contaminated
available
opening closing AB 1/min ms
by throttles on pilot valve as marked 20 opening 600-3000 closing 600-3000
direct mounted pilot valve 60 direct mounted pilot valve 50
°C °C
kg
VSV-F 87.0 upon request
Un Un DC AC IP65 (P54) ED
protection energized duty rating connection optional additional equipment
max. temperature
M12x1 media ambient E Ex e II T5
explosion proof
options
DC 24 V special voltage upon request
AC 230 V 50 Hz special voltage upon request 2.5 W (actuation pressure range 4-7 bar)
4.8 W pick up 11.0 VA holding 8.5 VA acc. DIN 40050 100% plug acc. DIN EN 175301-803 form B, 2 positions x180° / wire diameter 6-8 mm
connector acc. VDMA connector acc. DESINA illuminated plug with varistor
60°C 50°C
DC 24 V 3.25 W nominal voltage Un
AC 230 V 50 Hz 2.90 W power consumption
pneumatic specifications
options
actuation pressure range air consumption cycle speed control pilot valve interface
actuator ports
bar cm³/stroke
4-8 550 main valve speed variable by throttleson pilot valve preferably 5/2 way pilot valve
2/4
G 1/4
actuation pressure range control actuator ports by media
bar
G 3/8
hydraulic specifications
müller co-ax gmbh
•
Friedrich-Müller-Str. 1
•
remote mounted pilot valve outside temperatur range of media max. 160 °C
available available inductive / mechanical upon request LR/DNV/WAZ
power consumption
specifications highlighted in grey are optional
bi-directional upon request
via pilot valve
electrical specifications
■ specifications not highlighted are standard
2 A
⓪ aluminium ③ ④ steel, nickel plated
nominal voltage
If order or application specifications are incomplete or imprecise there exists
a risk of an incorrect technical design of the valve for the required application.
As a consequence, the physical and / or chemical properties of the materials or
seals used, may not be suitable for the intended application. To avoid hydraulic
shocks in pipelines, the flow velocities must be taken into account when
designing valves for liquids.
b
a b
pressure balanced, with spring return
media temperature ambient temperature flush ports leak ports limit switches
manual override approvals mounting weight additional equipment
details needed for hydraulic actuation
B
a
body material
flow direction switching cycles switching time
■ actuation pressure range min/max ■ hydraulic control valve function
2 A
operating principle
abrasive media damping
details needed for pneumatic actuation ■ nominal voltage ■ type of protection
■ actuation pressure range min/max ■ pilot valve type
b
a b
4
valve normally open symbol NO
Above stated body materials refer to the valve port connections that get in
contact with the media only!
B
a
74670 Forchtenberg
•
X/Y
Germany
options
15-30 / 30-60 preferably 4/2 way control valve G 1/4 •
fon +49(0)7947/828-0
•
NPT 1/4 upon request
fax +49(0)7947/828-11
•
Email [email protected]